Войти:
Оценок - 4, средний балл: 3.8 ( )

Инструкция по эксплуатации Keys Fitness, модель KF-E4.0

Производитель: Keys Fitness
Размер: 14.04 mb
Название файла: c92adaff-8dd2-4cc7-ad8e-a7b233437a21.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Step 2: Locate the right rotating arm (S1) and connect it to the upright post (D) at the arm joint and secure using allen screw (R8), spring washer (R16) and flat washer (R21). Step 3: Attach the right rotating handlebar (E1) to the right rotating arm (S1) and secure using 4 allen screws (R3), 4 spring washers (R13), and 4 flat washers (R14). Step 4: Connect the toggle wire (E1-1) with the toggle wire connection on the upright post (D1-3). Assembly R18S1AS1AR2R22R13R14 Use Tool6mm 5 Use Tool13mm14mm ASSEMBLY FOR RIGHT ROTATING HANDLEBAR TUBE Step 1: Insert 2 bushings (R18) on the tapered ends into the right pedal arm joint (A) - one for each side. Step 2: Attach the right pedal arm (A) to the right rotating handlebar tube (S1) and secure using allen screw (R2), flat washer (R14), spring washer (R13) and nut (R22). Assembly AS2DDS2R8R16R21FR11R16R20R19R23 6 Use Tool6mm ASSEMBLY FOR LEFT ROTATING HANDLEBAR TUBE Step 1: Insert ring seal (R19) and flat washer (R23) into the left arm joint of the upright post. Step 2: Locate the left rotating arm (S2) and connect it to the upright post (D) at the arm joint and secure using allen screw (R8), spring washer (R16) and flat washer (R21). ASSEMBLY FOR LEFT PEDAL Locate the left pedal assembly (F) and attach it to the main frame (A) at the pedal tube mount. Secure with allen screw (R11), spring washer (R16) and flat washer (R20). Assembly 7 Use Tool6mm AS2DFS2R18R2R13R14R22R18 ASSEMBLY FOR LEFT ROTATING HANDLEBAR TUBE Step 1: Insert 2 bushings (R18) on the tapered ends into the left pedal arm joint (F) - one from each side. Step 2: Attach the left pedal arm (F) to the left rotating handlebar tube (S2) and secure using allen screw (R2), spring washer (R13), flat washer (R14) and nut (R22) . Use Tool13mm14mm Assembly D1-3JE2DR3K1K2R5S2E2-1R13R14J1JJ1 8 ASSEMBLY FOR WATER BOTTLE HOLDER Step 1: Attach the water bottle holder (K2) and secure to the upright post (D) using 2 screws (R5). Step 2: Place water bottle (K1) inside water bottle holder (K2). Use Tool6mm Use Tool13mm14mm ASSEMBLY FOR CONSOLE Step 1: Remove 2 screws (J1) from the back of the console. Step 2: Connect the pulse wires, sensor wires and the toggle wires with the corresponding wires on the console. Step 4: Gently slide the wires down the upright post and secure the console (J) to the upright post (D) using 2 screws (J1). ASSEMBLY FOR LEFT ROTATING HANDLEBAR Step 1: Attach the left rotating handlebar (E2) to the left rotating handlebar tube (S2) and secure using 4 allen screws (R4), 4 spring washers (R13), and 4 flat washers (R14). Step 2: Connect the toggle wire (E2-1) with the toggle wire connection on the upright post (D1-3). Assembly 9 Use Tool6mm S1L1R10R12R9P2P1 ASSEMBLY FOR RIGHT PEDAL ARM COVER Step 1: Attach the pedal arm cover (L1) to the pedal arm joint and secure with screw (R9). Step 2: Repeat on left side with left pedal arm cover (L2). ASSEMBLY FOR ROTATING HANDLEBAR TUBE COVER Step 1: Attach the inner rotating handlebar tube cover (P1) and the outer rotating handlebar tube cover (P2) to the handlebar tube joint and secure with 2 screws (R9). Step 2: Repeat on left side with rotating handlebar tube covers (P1 and P2). Assembly 10 DR10N1N1R10N2N2 ASSEMBLY FOR HANDLEBAR COVERS Step 1: Attach the handlebar cover (N2) to the left handlebar joint at the rear of the unit and secure with screw (R10). Step 2: Attach the handlebar cover (N1) to the left handlebar joint at the front of the unit and secure with screw (R10). Step 3: Repeat steps 1 and 2 for the right handlebar. Use Tool6mm Assembly Congratulations! You have completed the assembly of your new Keys Fitness E4.0 Elliptical! ADAPTER PLUG-IN LOCATION Adapter (M) TRANSPORTING YOUR UNIT TRANSPORT WHEELS Assembly Console Information CONSOLE BUTTONS MODE: This button is used as an enter key, and will allow user to move to the next setting that can be changed. When pressed and held for 2 seconds or more, console will go back to the user profile selection screen. RESET: This button is used to return to program selection screen when workout is paused by pressing start/stop button. START/STOP: This button is used to start or stop training. RECOVERY: This button is used to begin the Recovery feature of the console (refer to “Console Functions” for more information). UP/DOWN: When changing settings of a program, these buttons are used to increase/decrease TIME, WEIGHT and AGE. During your workout, these buttons are used to increase/decrease the resistance level from 1 to 16. Press and hold for two seconds to rapidly increase/ decrease values. Console Information BUTTONS ON ROTATING HANDLEBAR In order to offer more flexibility during your workout, additional toggle switches are placed on the rotating handlebar. The buttons are the +/- and MODE/ENTER. They are used the same way as the buttons on the console. These buttons may be used at anytime as a substitute to pressing the buttons located on the console. CONSOLE FUNCTIONS TIME: If ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории