Si la temperatura de la plancha esta dentro del intervalo de 20°F/-6,67°C del valor fijado, la pantalla mostrara REDY; en caso contrario, mostrara LOW (baja) o HIGH (alta) hasta alcanzar el valor de temperatura fijado. Una vez que la temperatura de la plancha este en el intervalo de 20°F/-6,67°C por encima o por debajo del valor fijado, la pantalla cambiara a REDY. 7. AJUSTE DE LA COMPRESION DE LOS PANECILLOS 1. Hay dos pares de mandos de ajuste de compresion (uno de ellos numerado del 1 al 5 y

By circulating heated air evenly across the open staging area, the Heated Landing Zone keeps sandwiches hot without drying or cooking. The Heated Landing Zone meets all McDonald’s standards for safety, efficiency, food safety, and cleanliness. 3.1 HLZ Installation/Setup Upon arrival, inspect the HLZ for concealed damage. Immediately report any damage to the delivering freight company. Claims must be filed within 15 days after receipt of the unit. Make sure that the unit is placed on an even surf

If not present, replace computer. Motor is running at wrong speed (i.e. average time for three individual buns to pass through toaster is NOT between 15 and 18 seconds). A. Toaster improperly configured for power supply. A. Check data plate for voltage rating, and verify that power supply and toaster match. A. Improper power-supply. A. Verify that the power supply is 20 amp single-phase 200, 208 or 240VAC (depending upon model). Platen heats, but unit does not reach setpoint. B. Failed temperatu

DO NOT CUT OR REMOVE THE GROUNDING PRONG FROM THIS PLUG! • Voltage: 208VAC or 240VAC depending on model ordered • Frequency: 60 Hz (non-CE) or 50 Hz (CE and Australian models) • Phase: Single • Service: 30 Amp Setup: Setup of the toaster consists of unpacking the unit, placing it on a sturdy table or countertop adjacent to a properly grounded AC outlet of appropriate voltage, removing the cardboard packing inserts, installing the bun feeder in the slot on top of the cover, and plugging it in. NO