Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
SERVICE, SUPPORT AND WARRANTY Datalogic provides several services as well as technical support through its website. Log on to and click on the links indicated for further information including: · Datalogic Services - Warranty Extensions and Maintenance Agreements · Downloads - Software Downloads, Manuals and Catalogues · Contact Us - Listing of Datalogic Subsidiaries and Quality Partners · Authorised Repair Centres SAFETY PRECAUTIONS For installation, use and maintenance it is not necessary to open the reader. POWER SUPPLY ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT -This product is intended to be installed by Qualified Personnel only. This product is intended to be connected to a UL Listed Computer which supplies power directly to the reader or a UL Listed Direct Plug-in Power Unit marked LPS or “Class 2”, rated 10 to 30 V, minimum 1 A. COMPLIANCE LABEL TO EN60825-1:2001 GENERAL VIEW Matrix-1000™ 1 4 5 3 6 7 2 1 2 4 3 Figure A Reading Window Good Read LED Auxiliary Interface External Trigger LED Main/Auxiliary Interface Power On LED Main Tx LED 5 6 7 GUIDE TO INSTALLATION The following can be used as a checklist to verify all of the steps necessary for complete installation of the Matrix-1000. compact 2D reader. 1) Read all information in the section "Safety Precautions" at the beginning of this manual. 2) Correctly mount the reader using the bracket provided (sub-pars. under 2.2). 3) Position the reader at the correct reading distance according to your model (par. 2.5). 4) Make electrical connections to your Matrix-1000™ reader by either: a) Connecting the test cable to the Matrix-1000™ reader (par.2.4). b) Providing correct and complete system cabling according to the signals necessary for the layout of your application. • Layout: Point-to-point or Multidrop, etc. (sub-pars: 2.6); • Cabling: Power, Main RS485, Auxiliary RS232, External Trigger Input and Output (sub-pars. under 2.3). 5) Configure the Matrix-1000™ reader by installing and running VisiSet™ from the CD-ROM provided onto the configuration PC (pars. 3.1, 3.2, 3.3). See the Rapid Guide to Configuration in the VisiSet™ Help On Line. The main steps are: a) Select the codes to be read b) Set-up the communication parameters c) Define data formatting parameters d) Fine tune your Matrix-1000™ reader using the VisiSet™ Calibration Tool (par. 3.4.2). Specific VisiSet™ parameter details are also available in the Help On Line. 6) Exit the configuration program and run your application. The installation is now complete. GENERAL FEATURES 1 1 GENERAL FEATURES 1.1 INTRODUCTION Matrix-1000. is an area CCD reader for industrial application using 2D, 1D, stacked and postal codes. Matrix-1000. uses imaging technology and provides complete reading system functions by integrating: lighting system, image acquisition, image processing, decoding and communication into a single compact unit. This technology intrinsically provides omni-directional reading. Standard Application Program A Standard Application Program is factory-loaded onto Matrix-1000.. This program controls code reading, data formatting, serial port, and many other operating and control parameters. It is completely user configurable from a Laptop or PC using the dedicated configuration software named VisiSet™ provided on CD-ROM with the reader. There are different programmable operating modes to suit various code reading system requirements. A Calibration Tool is provided to verify the exact positioning of the reader and to maximize its reading performance. Programmability If your requirements are not met by the Standard Application Program, Custom Application Programs can be requested at your local Datalogic distributor. Matrix-1000™ 1 1.2 DESCRIPTION Some of the main features of this reader are given below: • Decoding of most popular linear and stacked barcodes, 2D code symbologies and postal codes • Omni-directional reading • Frame rate up to 30 frames/sec (1800 frames/min) • Moving code reading • Calibration Tool to verify exact code positioning in the Field of View and to maximize the reading performance • Parameter configuration via Windows-based VisiSet™ software • Different operating modes to suit various application requirements • User-defined database of acquisition recipes (parameter sets) • Verifier option with a user-defined match code database • Diagnostic software tools • 2 serial communication interfaces • General purpose optocoupled I/Os • Supply voltage ranges from 10 to 30 Vdc The reader is contained in a magnesium alloy housing; the mechanical dimensions are 121 x 73 x 57 mm and it weighs about 330 g. The protection class of the enclosure is IP64; therefore the reader is particularly suitable for industrial environments where protection against harsh external conditions is required. GENERAL FEATURES 1 Electrical connection of Power, serial interfaces and I/O signals is provided through a 25-pin connector (see Figure A, 3). In addition the...