Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
7. While holding the aneroid and small hex nut assembly in one hand, insert the small hex nut into the top of the smaller diameter chrome plated pole. Turn the pole counter-clockwise to attach both assemblies. Securely tighten the assembly. 8. The floor-mounted Omron Aneroid is now ready for use. On-Site Calibration: 1. Remove the coiled tube from the connector on the underside of the aneroid. 2. Insert the calibration tool (or small flat-head screw driver) into the connector (from where the coiled tube was removed). 3. Turn the calibration tool until the needle on the front of the gauge is centered at the bottom of the gauge. 6 7 240 240 220 180160140 120 100 80 60 40 20 260 280 300 mmHg SPHYGMOMANOMETER CERTIFIED MADE IN J A PA N Sphygmomanometer Five-Legged Base Large Washer Small Washer Large Hex Bolt Wheel Casters Small Diameter Chrome-Plated Pole Large Diameter Chrome-Plated Pole Black Knob OMRON HEALTHCARE, INC. 300 Lakeview Parkway Vernon Hills, Illinois 60061 Telephone: 1-847-680-6200 Toll Free Order Number: 1-800-634-4350 Copyright © 2002 OMRON HEALTHCARE, INC Printed in Japan 11-675685INST ...
Эта инструкция также подходит к моделям:Тонометры - 11 685 (420.18 kb)
Тонометры - 11-685NL (420.18 kb)
Тонометры - 11-675D (420.18 kb)