You may find their name on the furnace or in your Homeowner's Packet. If the installer's name is not known, call your builder or home retailer if yours is a new residence. SECOND: Contact the nearest distributor. (See telephone yellow pages.) THIRD: Contact: Carrier Corporation Consumer Relations P.O. Box 4808 Syracuse, New York 13221 Phone: 1-800-428-4326 Model No.__Unit Serial No._ Date of Installation__Installed by_ Name of Owner__Address of Installation_ THERMOSTAT LIMITED WARRANTY F

GENERAL Totaline® thermostats are wall-mounted, low-voltage thermostats which maintain room temperature by controlling theoperation of an HVAC (heating, ventilation and air conditioning) system using separate heating and cooling set points andauto-changeover capability. Batteries are not required. During power interruption theinternal memory stores set points indefinitely. OPERATION Thermostat Display — The thermostat display is located in the top center of the thermostat. See Fig. 1. The follow

GENERAL This manual will assist you in using your Carrier Comfort System thermostat. There are 2 basic types of thermostats that you may encounter. They are called the monitor thermostat and the zone controller. The monitor thermostat can be identified by the system switches (FAN, HEAT, COOL) which are located along the bottom edge of the front cover. The monitor thermostat can be equipped with or without a timeclock. The timeclock display is located in the upper right corner of the monitor ther

HOLIDAY MODE — The Holiday button places the thermostat into Holiday mode. During Holiday mode, the unoccupied set points are enforced. The number of days the thermostat will be in Holiday mode can be set. Set Clock — The Set Clock button allows the user to change the time and day displayed on the thermostat. Press the Set Clock button to enter Set Time mode. See Fig. 4. The current time will blink on and off. Press the UP ARROW and DOWN ARROW buttons until the correct time is shown. Hold down t

GENERAL Carrier’s 7-day, commercial, programmable thermostats are wall-mounted, low-voltage thermostats which maintain room temperature by controlling the operation of an HVAC (heating, cooling and ventilation) system. Separate heating and cooling set points and auto-changeover capability allow occupied and unoccupied programming schedules for energy savings. All thermostats allow up to 3 occupied and one unoccupied time/temperature setting to be programmed per 24-hour period. Each thermostat st

This will create a Heat Stage 1 demand. A small triangle to the left of this HEAT icon will flash or come on continually. Flashing means the equipment is going to turn on but is presently being held off by a system timer. (See Operational Information for timer descriptions.) Defeat timer by pressing INCREASE TEMPERATURE button (up and FAN buttons together). This will make the triangle stay on and turn on Heat Stage 1. To turn off, reduce heating set point below room temperature. The heating and

Possible choices are Mo-Fr (Monday through Friday), Sa (Saturday), and Su (Sunday). Press the Mode button when the desired day is shown. 7. The Start Time for Occupied 1 for the chosen day will be displayed. Use the UP ARROW and DOWN ARROW buttons to raise or lower the time until the desired Start Time is shown. Press the Mode button to continue. See Fig. 5. 8. The Stop Time for Occupied 1 for the chosen day will be displayed. Use the UP ARROW and DOWN ARROW buttons to raise or lower the time un

Sepm'ate heating and cooling set points and auto-changeover capability allow occupied and unoccupied programming for energy savings. During power interruption the internal memory stores temperature and mode settings for an unlimited time. Batteries are not required. OPERATION Thermostat Display --The thermostat display is located in the top center of the thermostat. See Fig. 1. The following information can be displayed on the screen: • mode (OFF. HEAT. COOL, EHEAT, or AUTO) • fan setting (ON or

SERVICE FILTER Indicator _ lets you know it is time to clean or replace your system's air Mter. / Room Temperature Display --/ ishows current room temperature. COOL ON Indicat° e---_ is displayed when th / coolingequipment operating. is HEAT ON Indicator /"_/ is displayed when the heating equipment is operating. AUXILIARY HEAT Indicator is displayed when a heat pump system is operating with auxiliary heat air Mter. Fig. 1 --Thermostat Display and Buttons Replacement Components Division Carrier C

Reset Filter Display --The thermostat will display "FILTER" on the LCD when it is time to change or clean the filtel: After cleaning or changing the filter, press the RESET FILTER button to restart the timer and turn off the indicator Auto Changeover Operation --The thermostat will provide automatic changeover from Heating to Cooling mode and Cooling to Heating mode when required. The thermostat will automatically switch to maintain the desired temperature setting. The thermostat does not need t