Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
7) With the Auto Recovery feature enabled, you do not need to set your comfort program times early. Auto Recovery will determine how early to turn your system on, so that the room is comfortable at the program time. Weekday/Weekend Programming Step 1 ¦ Press to enter program mode. Weekdays are displayed and program 1 is flashing. ¦ Press to change heat of cool mode programming while in programming mode Step 2 ¦ The Program hour and AM or PM indicator are flashing. Press to change the hour. Step 3 ¦ Press again to change to the minute position. The current minute will be flashing. ¦ Press to change the minute. 21 program system or program or Step 4 ¦ Press again to change to the program temperature. The current temperature will be flashing. ¦ Press to change the temperature. Step 5 ¦ Press to select Auto or On for each program. “Auto” will automatically cycle your system to maintain your set temperature. “On” will run your system continuously. “Auto” is the default setting. Step 6 ¦ (Does not apply to thermostat model 44660) Press to select the sensor that will control each thermostat program, either for sensor 1, for sensor 2, or for the thermostat. The thermostat can also be configured to take an average of any combination of the three. Step 7 ¦ Press again to move to the next program number. ¦ Repeat Steps 3 through 5 to change the remaining Weekday programs. program or fan sensor program Step 8 ¦ Press to change to Weekend programs. ¦ Repeat steps 3 through 5 to complete the weekend programs. ¦ Press at any time to exit the Program Mode. ¦ After 15 seconds, the thermostat will return to normal mode automatically. Step 9 ¦ Change to program the other system mode, and repeat steps 2 through 7. prog/day ret/clear system 7-Day Programming Step 1 ¦ Press to enter program mode, display shows weekday programs. ¦ Press 2 times to reach the Monday program. Step 2 ¦ Press to select HEAT or COOL to program the corresponding system. Step 3 ¦ The Program hour and AM or PM indicator are flashing. Press or to change the hour. Step 4 ¦ Press again to change to the minute position. The current minute will be flashing. ¦ Press or to change the minute. 21 program 21 prog/day system program program Step 5 ¦ Press again to change to the program temperature. The current temperature will be flashing. ¦ Press or to change the temperature. Step 6 ¦ Press to move to programs 2, 3 and 4. ¦ Repeat Steps 3 through 5 to complete the programs for Monday. Step 7 ¦ Press to change to the next day’s programs. ¦ Repeat Steps 3 through 6 to complete the selected day’s programs. ¦ Continue repeating Steps 3 through 7 to program all 7 days of the week. Step 8 ¦ When finished, press to return to normal mode. ¦ After 15 seconds, the thermostat will return to normal mode automatically. Step 9 ¦ Change to program the other system mode and repeat steps 2 through 8 above. program prog/day ret/clear system Everyday Programming Step 2 ¦ Press to enter program mode, display shows weekday programs. ¦ Press 9 times to reach the Everyday program. ¦ Press to select HEAT or COOL to program the corresponding system. Step 3 ¦ The Program hour and AM or PM indicator are flashing. Press to change the hour. program prog/day system or Step 4 ¦ Press again to change the minute position. The current minute will be flashing. ¦ Press to change the minute. Step 5 ¦ Press again to change to the program temperature. The current temperature will be flashing. ¦ Press to change the temperature. Step 6 ¦ Press again to move the next program number. ¦ Repeat Steps 3 through 5 to change the remaining programs. ¦ Press at any time to exit the Program Mode. ¦ After 15 seconds, the thermostat will return to Normal mode automatically. Step 7 ¦ Change to program the other system mode and repeat steps 2 through 6. program or program or program ret/clear system Program Options Programmable Fan ¦ Any time during programming, this will change the fan display between “AUTO” and “ON” for the selected system and Program number. (Heat and Cool can be set separately.) “AUTO” = Fan control runs when the system is ON “ON” = Fan control runs continuously NOTE: Fan must be set to “PROG” for the Programmable Fan to be activated. Reviewing Programs You may want to review the programs to confirm that the settings are compatible with your lifestyle. ¦ Press to display M - F programs. ¦ Press repeatedly to cycle through the 4 programs. fan Weekday Programs program Weekend Programs ¦ Press to display the Sa - Su programs. ¦ Press repeatedly to cycle through the 4 programs. ¦ Press to display M - F programs. NOTE: Time or Temperature display will be blank when at least one weekday program is different. (All programs will de displayed if programmed in Everyday mode.) ¦ Press to change to Sa - Su. Again, if part of the display is blank, one of the weekend programs is different. ¦ Press again to change to Monday’s program. ¦ Continue pressing to cycle through each day, or to reach the Everyday program...
Эта инструкция также подходит к моделям:Термостаты - 43665 (771.8 kb)
Термостаты - 43665 (771.8 kb)