Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Aube Technologies, модель 43665

Производитель: Aube Technologies
Размер: 771.8 kb
Название файла: 44005.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


The current minute will be flashing. ¦ Press to change the Minute up or down to the current minute. day/time or day/time or Step 3 ¦ Press again to change from minute setting to day setting. The current day will be flashing. ¦ Press to change the Day up or down to the current day. Step 4 ¦ Press again to change back to the normal display. NOTE: You may press at any time during Day and Time setting to return to the normal display. day/time or day/time or ret/clear ret/clear 12 Hr. / 24 Hr. Time Format Your thermostat is set from the factory in normal 12 (AM / PM) format. To change to 24 hour (military) time, press at any time while the Hour, Minute, or Day is flashing to toggle between the 12 hour and 24 hour formats. The AM / PM indicator will not be displayed in the 24 hour mode. Both the current time and all programs will change automatically to the selected format. The time format may also be changed in the Option Menu. option Programming Introduction Studies conducted by the Department of Energy estimate that setting your thermostat back 10°F (6°C) for two 8-hour periods during winter can reduce your fuel bill by as much as 33%. By setting your thermostat up 5°F (3°C) for two 8- hour periods during summer you can reduce your fuel bill up to 25%. Your thermostat is capable of holding up to 4 separate programs for each day of the week. You can program weekdays as a group, weekends as a group, all 7 days individually or everyday as a group. The system fan may also be set to run continuously during a program time period. Your Hunter thermostat is pre-programmed to meet the ENERGY STAR® guidelines for energy efficiency. ¦ At power-up or after a reset, all 7 days of the week have these default programs: ¦ The following sections describe how to change these programs. Temperature in F° (C°) Program Number Time Heat Cool 1 6:00am 68°F (20°C) 78°F (26°C) 2 8:00am 60°F (16°C) 85°F (29°C) 3 4:00pm 68°F (20°C) 78°F (26°C) 4 10:00pm 60°F (16°C) 82°F (28°C) Personal Program Schedule Before changing programs, use this Personal Program Schedule to determine which times and temperature settings will best satisfy both your comfort and energy saving requirements. Use a pencil so you can revise your records each time you change your temperature settings. Heating Day Prog. 1 Prog. 2 Prog. 3 Prog. 4 Mon. Time Temp Time Temp Time Temp Time Temp Tues. Time Temp Time Temp Time Temp Time Temp Wed. Time Temp Time Temp Time Temp Time Temp Thurs. Time Temp Time Temp Time Temp Time Temp Fri. Time Temp Time Temp Time Temp Time Temp Sat. Time Temp Time Temp Time Temp Time Temp Sun. Time Temp Time Temp Time Temp Time Temp (continued) Personal Program Schedule (continued) Cooling Day Prog. 1 Prog. 2 Prog. 3 Prog. 4 Mon. Time Temp Time Temp Time Temp Time Temp Tues. Time Temp Time Temp Time Temp Time Temp Wed. Time Temp Time Temp Time Temp Time Temp Thurs. Time Temp Time Temp Time Temp Time Temp Fri. Time Temp Time Temp Time Temp Time Temp Sat. Time Temp Time Temp Time Temp Time Temp Sun. Time Temp Time Temp Time Temp Time Temp Programming ¦ Your thermostat can be programmed for weekdays and weekends, have unique programs for all 7 days, or the same program for everyday. Use Weekday/Weekend Programming on page 24, 7-day Programming on page 26, or Everyday Programming on page 28 to enter or revise programs to match your Personal Program Schedule. ¦ Familiarize yourself with Manual Programming, so that you can easily modify your programs as your comfort needs change. Follow the steps below to change the program times and temperatures. NOTE: 1) The program time can be set in 10 minute increments, and remains the same for both Heat and Cool programs. 2) The program temperature can be set in increments of 1°F (1°C). 3) The Heat setpoint can not be set higher than the Cool setpoint, and the Cool setpoint can not be set lower than the Heat setpoint. 4) If the system selector is in AUTO mode, the current operating mode will be used for programming. 5) After 15 seconds without a key press, the thermostat will return to normal display mode. 6) When setting the program time, note the AM / PM indicator. 7) With the Auto Recovery feature enabled, you do not need to set your comfort program times early. Auto Recovery will determine how early to turn your system on, so that the room is comfortable at the program time. Weekday/Weekend Programming Step 1 ¦ Press to enter program mode. Weekdays are displayed and program 1 is flashing. ¦ Press to change heat of cool mode programming while in programming mode Step 2 ¦ The Program hour and AM or PM indicator are flashing. Press to change the hour. Step 3 ¦ Press again to change to the minute position. The current minute will be flashing. ¦ Press to change the minute. 21 program system or program or Step 4 ¦ Press again to change to the program temperature. The current temperature will be flashing. ¦ Press to change the temperature. Step 5 ¦ Press to select Auto or On for each program. “Auto” will automaticall...

Эта инструкция также подходит к моделям:
Термостаты - 43665 (771.8 kb)
Термостаты - 43665 (771.8 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории