Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
See also the troubleshooting suggestions later in this appendix. IMPORTANT Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast channel (a channel from ANT 1, ANT 2, a cable box, or satellite receiver), first check other channels from the same input before changing settings. If most other channels from the same input seem correct, there is likely a problem with the broadcast rather than with the TV. Use care in this case, as changes you make to fix problems on individual channels also affect all other channels on the same input. Reset Name When to Use How to Use Resulting Action Format When the picture shape seems incorrect, use FORMAT to change the shape of the picture. Press the FORMAT key to cycle through the available formats to find the best format for the current picture. The last-used format for a signal type is memorized for each input. The next time the same input and the same signal type is viewed, the last-used format will be recalled. PerfectColor™ When the color intensities 1. While viewing the input to be reset, All PerfectColor/PerfecTint sliders and PerfecTint™ seem out of balance, press MENU to display the Main are reset to the original center Reset use the PerfectColor/ menu with the A/V icon highlighted. position. The PefectColor/PerfecTint (for the single input currently being watched) PerfecTint reset to reset the color balances to the original factory settings. Both PerfectColor and PerfecTint and are reset at the same time. 2. Use to highlight PerfectColor and press ENTER to display the PerfectColor adjustment screen. 3. Press CANCEL to reset the colors. settings for other inputs remain unchanged. A/V Memory When audio and/or video 1. While viewing the input to be reset, All Audio and Video settings for the Reset settings for a single input press MENU to display the Main individual input are reset except (for the single seem incorrect, use A/V menu with the A/V icon highlighted. for the Listen To, Language, audio input currently being watched) Memory Reset to return the input to the original factory settings. 2. Use to highlight the Reset icon and press ENTER to reset. Balance, and Closed Caption settings. A/V Reset To reset audio and video While viewing the TV, press the front All Audio and Video settings are (for all inputs) adjustments for all inputs panel buttons GUIDE and FORMAT at the returned to the original factory to the original factory same time. settings, including Listen To and settings. Language, plus Closed Captions settings and Format settings . Channel To erase and 1. While viewing the TV, press MENU to All previously memorized chan- Memorization re-memorize channels on display the Main menu. nels for the selected antenna ANT 1 or ANT 2. 2. Press to highlight the Setup icon. input are erased and a new 3. Press to highlight the Scan icon. set of memorized channels is 4. Press to highlight the antenna created. All custom settings for input and reception mode, e.g. Ant Fav, channel names, and channel 1 Air. locks are deleted. To add or 5. Press to highlight the Start delete individual channels, see button icon and press ENTER to start the memorization. Edit menu instructions in chapter 5, “TV Menu Settings.” Lock Menu Pass Code To change your Lock menu pass code See the cutout page in Appendix C. Allows a new code to be established. Appendices Appendix E: Troubleshooting, continued Reset Name When to Use How to Use Resulting Action Front-Panel Lock To re-enable the front• When Energy Mode is set to Fast Allows the front panel to be unlocked Release panel controls after Power On, press and hold the MENU if the remote control is misplaced. activation of the Front-button on the front panel for over Panel Lock eight seconds. • When Energy Mode is set to Low Power, press POWER on the front panel to turn on the TV. Press and hold the MENU button on the front panel for over eight seconds. System Reset If the TV does not turn on or off, does not respond to the remote control or front panel buttons, or has audio but no video. Press the SYSTEM RESET button on the front panel with a pointed object such as the point of pencil or end tip of a paperclip. The TV will turn off and the green LED will flash quickly for about one minute. When the green LED stops flashing, you may turn on the TV. The changes you made most recently, before using SYSTEM RESET, may be lost. Changes you made previously, however, are not lost. TV Reset To reset all consumer1. While viewing the TV, press MENU to The TV will start the initialization IMPORTANT: accessible settings display the TV Main menu. process. The TV will then turn off Use this reset only if all other resets have been unsuccessful. and all memories to the original factory defaults. CAUTION: All owner- performed setups and adjustments will be erased. 2. With the Main menu displayed, press number keys 1 2 3 to display the Reset menu. 3. READ THE ON-SCREEN WARNING AND INSTRUCTIONS. • If you do not w...
Эта инструкция также подходит к моделям:Телевизоры - WD-57833 (3.33 mb)
Телевизоры - WD-57833 (3.33 mb)