Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
Consult your local cable company. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. [EXTERNAL CONNECTION] VIDEO input (rear) ANT. . VIDEO R L IN AUDIO IN VIDEO input (front) VIDEO L - AUDIO - R Video Cable Audio Cable Video Cassette Recorder Video Cable Audio Cable Video Camera Video Game Front of this TV Rear of this TV Note: . When both rear and front input jacks are connected simultaneously, priority is given to the front jacks. When using rear input jacks, disconnect the cables from the front jacks. Notes: . If you hit [GAME] when the TV is off, the TV turns on and enters in Game mode. . If you adjust another picture control while in Game mode, this mode will automatically be canceled. ex. ex. Cables used here are available on the market. OPERATIONS Note: . If some digits appear in the corner of the screen when the unit is turned on for the first time, hit [POWER] without unplugging the power cord. REMOTE CONTROL AND FRONT PANEL FUNCTION POWER button To turn TV on/off Channel number buttons CH(ANNEL) ^/Ў buttons MENU button To view on-screen menu GAME button SLEEP button DISPLAY button To display CH No./Audio Status CHANNEL RETURN button To return to previous channel MUTE button VOL(UME) ^/Ў buttons To select channels To adjust volume Infrared Sensor Window POWER button To turn TV on/off CHANNEL ^/Ў buttons To select channels VOLUME m/n buttons To adjust volume MENU button To view on-screen menu AUDIO L/R input jacks VIDEO input jack INSTALLING THE BATTERIES Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. [BATTERY PRECAUTIONS] • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. • Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. • If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. 1 2 3 UHF/VHF Rod Antenna (Not supplied) OR SELECTING AUDIO/VIDEO INPUT You can select external input jacks by hitting [GAME] on the remote control. HEADPHONE jack 1 GAME GAME To use external input Picture: GAME Input: External (front/rear) 2 15 To return to TV channel GAME In the Game mode, you can use front or rear input jacks with suitable picture adjustments for video games. 2 [-] GAME MODE [+] OFF ON VIDEO Select “PICTURE” After 10 seconds 3 Picture: Customized Input: External 15 To return to TV channel GAME MENU VOL You can enter into Video mode from Game mode by adjusting a Picture control. (OUT) (OUT) (OUT) (IN) (IN) (IN) (IN) (OUT) 2 times 1 GAME GAME To use external input Picture: GAME Input: External (front/rear) Note: • For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit. RF Cable RF Cable To cancel Game mode only Flat twinlead cable Note: . The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment. OPERATIONS (Continued) CHANNEL SETTING [AUTO PRESET CHANNELS] As the initial setting, this TV has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory. 1 11 MENU CH CH PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] VOL Select “CHANNEL SET” The tuner scans and memorizes all available channels in your area. CH CH VOL ADD/DELETE AUTO PRESET CH 2 22 Select “AUTO PRESET CH” 3 33 When the scanning is completed, the lowest memorized channel appears on the TV screen. Notes: . The TV distinguishes between standard TV channels and cable (CATV) channels. . The TV may recognize TV channels as CATV channels if reception condition is poor. If this happens, check the antenna connections and try steps 2 to 3 again when reception conditions are better. . If there is no TV signal input, “NO TV SIGNALS” will appear on the display after the completion of channel scanning. NO TV SIGNALS [ADDING/DELETING CHANNELS] You can add or delete channels manually. 1 11 MENU CH CH PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] VOL Select “CHANNEL SET” 2 22 VOL ADD/DELETE AUTO PRESET CH Select “ADD/DELETE” CH CH Select the channel you wish3 33 4 44 VOL VOL Add: light blue Delete: light red 15 ADD/DELETE Add or delete the channel Note: . The menu will disappear automatically after about 10 seconds. SLEEP TIMER SETTING *Second Audio Program (SAP) : Your program can also be received in a sec- ond language or sometimes a radio station. MULTI-CHANNEL TELEVISION SOUND (MTS) Type of...