Войти:
Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации JVC, модель WD-52525

Производитель: JVC
Размер: 5.3 mb
Название файла: faf8450d-78b8-1c34-51fa-764fd1c57a6e.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


1. Start the playback of the desired track on the A/V disc. 2. Use the number buttons to enter the time code position of hours followed by minutes. For example, to enter one hour and twenty-two minutes (1:22) into the track, enter 1, 2, 2. 3. Press ENTER to skip to the time code position. 4. To cancel the request or to start over, press CANCEL instead of ENTER . PC Viewing PC Input Figure 16 To display your PC screen on the TV, first, connect it to the TV’s back panel (see Chapter 2). You will then be able to select it through the Device Selection Menu. For the correct screen resolution (pixels), use the PC’s Control Panel settings. Your Mitsubishi TV can display resolutions from standard VGA (640 x 480) through PC 720p (1280 x 720). See Appendix B, in this book for more screen resolutions. The instructions below are for most PC’s. 1. In the PC’s “Start” menu, select “Settings”. 2. Select “Control Panel”. 3. Select “Display”. 4. Choose the “Settings” tab. 5. Depending on your PC, either: Use the Screen area slider or Use the Screen Resolution slider to adjust the resolution. You may need to restart the PC for this change to take effect. Hint: You may want to set the computer’s screen saver to a pattern, to display after several minutes, as a reminder that the TV is still powered on and time is being added to the lamp’s elapsed hours. Even if the screen appears dark, if the TV’s power is on, the lamp is in use. .................... Figure 16. PC resolution XGA selection MediaCommand™ and Media Card Playback Warning: Some media cards available on the market are not properly certified to follow the card type specified and cannot be used by the Card Reader. If you experience problems with the reading of your file, please transfer your files to a properly certified card. Media Card Slots Inserting a media card 1. Insert a card into a matching card slot on the front of the TV. Be sure to use the correct card slot. Card 1 will accept MultiMediaCard™ and SD Media Card. Card 2 will accept SmartMedia™. Card 3 will accept CompactFlash®. Card 4 will accept MEMORY STICK™. Cards up to 128mb, with a file format of FAT 16 (block size = 1024 or 2048) are supported. Normally the label side should be up, but if the card does not fit, try turning the card over and insert again. When properly inserted, the light next to the slot will light up. 2. Press DEVICE on the remote control to display the Device Selection Menu and then select the correct card slot from the list, using ADJUST , , or . 3. The Media Dialog box (figure 17) will automatically display. Use the AUDIO button to switch from JPEG Picture Slideshow setup to MP3 or WMA7 Audio Playlist setup or use the VIDEO button on the remote to switch from the MP3 or WMA Audio Playlist setup to JPEG Picture Slideshow setup. Don’t pull the media card out while it is playing. 4. On the remote control, press: PLAY: to start the slideshow or play audio. GUIDE: to display the JPEG Thumbnail menu (Figure 18) or Audio track playlist (Figure 19) DEVICE MENU: to display the Media Setup menu (Figure 20). Remote Control Buttons for Controlling the Playback For JPEG Pictures Slideshow: PLAY: begins or resumes slideshow playback PAUSE: pauses or resumes playback while in the automatic advance mode. FF: skips to the next slide. REW: returns to the previous slide. FORMAT: single press rotates the slide 90.. Multiple press continues to rotate the slide. STOP: Stop slideshow, return to media card screen. For MP3 or WMA Audio Playback PLAY: begins or resumes playlist playback. PAUSE: pauses or resumes playback. FF: skips to the next track/song. REW: skips to the previous track/song. STOP: Stop playback and returns to media card screen. Using the Picture Thumbnail Menu or Audio Playlist Menu For JPEG Picture Thumbnail Menu: Figure 18 1. Press GUIDE on the remote to display the JPEG picture Thumbnail menu. 2. Press ADJUST , , or to move the highlight to different images (CH up/down will change pages of the Thumbnail menu). Use REW to go to the first slide and FF to go to the last slide on the page. 3. Press FORMAT to rotate the selected image 90. (pressing FORMAT four times will rotate the image completely around to the original position). 4. Press PLAY to begin playback of the Slideshow from the selected image. The Thumbnail menu will be taken down. ........................................................................................................................................................................................................................................ Figure 17. Media Dialog Box Figure 18. JPEG Thumbnails Media Command™ and Media Card Playback, continued For MP3 or WMA7 Playlist Menu: Figure 19 1. Press GUIDE to display the Playlist menu. 2. Using ADJUST or to move the highlight to different tracks (CH up/down will change pages of the Playlist). 3. Press PLAY to begin playback. The Playlist menu will be taken down. An asterisk (*) will be next to the song currently playin...

Эта инструкция также подходит к моделям:
Телевизоры - WD-52525 (5.3 mb)
Телевизоры - WD-52725, WD-62525, WD-52525, WD-62725 (5.3 mb)
Телевизоры - WD-62725 (5.3 mb)
Телевизоры - WD-52525 (5.3 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории