Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
PLEASE TURN OFF ALL POWER BEFORE CONNECTING DEVICES TOGETHER. VCR Connect VCR's RF OUT terminal to the RF IN jack located on the real panel of the TV. Coaxial Cable RF IN Input from Device to TV AUDIO/VIDEO OUT DO NOT connect both composite (yellow video terminal) and S-Video terminal. Use only one of the two. Also, remember to connect the audio cables when using S-Video. DVD Player With S - VIDEO Terminal The front terminals may be easier to use with a camcorder. The connections are identical. OR llow Red stScript Picture sxj Yellow VIDEO AUDIO Red White Camcorder White VCR Output from TV to Device AUDIO/VIDEO IN Yellow White Yellow White VIDEO AUDIO RedRed VCR 8 Instruction Manual FUNCTIONS & FEATURES Turn On/Off 1. Turn On Plug in the power cord, and the TV should enter into Standby mode and its power indicator should light. Pressing STANDBY or the CH+/- key will turn on the TV and the power indicator will turn off. 2. Standby (Soft Off) While the TV is on, press the STANDBY key will put the TV in Standby mode. Basic Functions Changing the Channel While in Tuner mode, press the CH +/ - keys to change the channel, or use the numeric keypad to enter a new channel. Adjusting the Volume To adjust the volume, press the VOL +/ - keys. Also, you may press the FUNCTION (F) key along with the VOL +/ - keys to adjust the volume in increments or decrements of 4. Muting the Volume To mute the volume, press the MUTE key. To restore the volume, press MUTE again or press the VOL + key. Function Selection Menus To change the setting of any function, press the MENU key to bring up the main menu. Press the up or down arrow key to highlight the desired sub-menu and press the left or right arrow key to access. While in the submenu, use the up or down arrow key to select the item and the left or right arrow to adjust the setting. Press the MENU key to return to the main menu and exit. While in the setup menu, CH-/+ and VOL-/+ keys on the front panel will function as the down/up/left/right arrow keys on the remote control. Picture Menu Features This menu allows you to adjust the various picture settings. Use the up or down arrow key to move between the various settings, and the left or right arrow key to adjust them. Tint: -31 (more greenish) to +31 (more purplish) Brightness: 0 (dimmest) to 63 (brightest) Contrast: 0 (minimum contrast) to 63 (maximum contrast) Color: 0 (minimum color) to 63 (maximum color) Sharp: 0 (minimum sharpness) to 63 (maximum sharpness) Picture Tint 00 Brightness 31 Contrast Color Sharp 31 31 31 Audio Menu Features This menu allows you to adjust the various audio settings. Use the up or down arrow key to move between the various settings, and the left or right arrow key to adjust them. Bass: 0 (less Bass) to 63 (more Bass) Treble: 0 (less Treble) to 63 (more Treble) Balance: L31 (Left Dominance) to R31 (Right Dominance) Surround: Off; Low (slight surround effect); High (marked surround effect) Audio Bass Treble Balance 31 31 Surround Low 9 00 Instruction Manual FUNCTIONS & FEATURES (continued) Tuner Menu Note: This menu is only accessible while the TV is in Tuner mode. Channel: This feature allows you to change the channel displaying on screen. Use the left or right arrow key or the numeric keypad to change the channel. Add/Erase: This feature allows you to add or remove the channel currently display on screen to the "active channel list" . Active channel list is the list of channel that is available by pressing the CH+/- keys. Use the left or right arrow key to add or erase. Antenna: This feature sets the TV tuner to an Air antenna or a Cable antenna. Please use Air mode when using an over-the-air antenna; use Cable mode for a cable hookup. Use the left or right arrow key to select between the two options. Auto Program: This feature will setup the Active channel list for the user. The list will include only the channels with a signal detected. Press the right arrow key to begin and the left arrow key to stop the process. Channel Add/Erase Antenna Auto Program 2 Add Air Tuner Stop Start Timer Menu Press the TIMER key on the remote control to access this menu. Time This feature allows you to set the clock on the TV. On Time This feature allows you to preset a time when the TV set will turn on. On Channel This feature allows you to preset the channel on display when the On Time is activated. Off Time This feature allows you to preset a time when the TV set will turn off. Timer Time --:-On Time --:-On Channel Off Time --:- System Menu Language This feature allows you to pick a language used for the on screen display (OSD). Use the left or right arrow key to select the language of your choice - English (Eng.), French (Fra.) or Spanish (Esp.). Blue Background This feature gives you the option to display a blue background on the TV screen when there is no signal present. Use the left or right arrow key to toggle between on and off. Closed Caption Closed caption is a feature that allows your TV set to displa...
Эта инструкция также подходит к моделям:Телевизоры - AT2408S, AT2708S (100.57 kb)