Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - 55PFL4909/F7 (11.88 mb)
Телевизоры - 55PFL4909/F7 (1.23 mb)
Телевизоры - 55PFL4909/F7 (1.18 mb)
Телевизоры - 55PFL4909/F7 (11.47 mb)
Фрагмент инструкции
* WPS (Easy Connect) cannot be used when the security protocol is set to WEP. Change the Access Point’s security mode from WEP to WPA or WPA2 (recommended). Wired setting Select to use an Ethernet cable to connect to the internet by wired connection. Please purchase shielded Ethernet cables at your local store and use it when you connect to Network equipment. 4 Use H I to select Wired, then press OK. . Connection test will start automatically. L p. 42 Continued on next page. 40 .English Manual network settings 2 Use H I to select Manual network settings, then press OK. Proxy settingIP setting modeAutoWirelessProxy configurationIP configurationWireless network settingNetwork selectionReset network settingsHome networkSetting statusConnection testManual network settingsNetwork settings assistant Network selection 3 Use H I to select Network selection, then press OK. 4 Use H I to select the desired setting, then press OK. If you connect to an Ethernet cable, select Wired Wired to connect to the Internet. If you have a router with WPS function, select Wireless Wireless to connect to the Internet. Wireless network setting This menu is displayed only when you set Wireless in Network selection. In order to use a wireless network, you must set up a connection to the AP (e.g. wireless router). 3 Use H I to select Wireless network setting, then press OK. Auto Search for wireless networks automatically and select the SSID from the list. 4 Use H I to select Auto, then press OK. 5 The list of wireless networks will be displayed. Use H I to select the appropriate the SSID, then press OK. SelectEnter KeySelectEnter KeyRouter 4Router 3Router 2Router 1Manually enter your SSIDAuto . If you select the SSID with , WEP*2 / WPA / WPA2 Key entry screen will appear. Enter the WEP*2 / WPA / WPA2 key of the selected wireless network using H I J K, then press OK. . If you select the SSID has a WPS, the WPS setting screen will appear. Use H I J K to select a setting, then press OK. Easy Connect WPS code Manual Select this setting if your router has a Wi-Fi Protected Setup (WPS) button. Start scanning for wireless networks on the TV after pressing the WPS button on your router. If connection test fails, try Easy Connect again.*1 If it fails then refer to the router’s manual for more details. Select this setting if your router has a WPS but does not have a WPS button. Enter the 8-digit WPS PIN code shown on your TV in the router settings menu via PC before Connect is selected. If your wireless network with authentication setting (WEP*2, WPA or WPA2), WEP*2 / WPA / WPA2 Key entry screen will appear. Enter the WEP*2 / WPA / WPA2 key of the selected wireless network using H I J K, then press OK. *1 WPS (Easy Connect) cannot be used when the security protocol is set to WEP. Change the Access Point’s security mode from WEP to WPA or WPA2 (recommended). *2 WEP is not recommended to be used due to its Major security flaws. Change the Security protoco...
Эта инструкция также подходит к моделям:Телевизоры - 49PFL4609/F7 (11.59 mb)
Телевизоры - 40PFL4909/F7 (11.59 mb)
Телевизоры - 40PFL4609/F7 (11.59 mb)
Телевизоры - 49PFL4909/F7 (11.59 mb)