Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
NOTES: • Be sure to turn off the power to all components in the system before connecting them together. • Refer to the Owner's Manuals for the components to be connected to the TV/VCR/DVD. • If connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 45 to set DOLBY DIGITAL to ON.) • Unless connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. TV/VCR SECTION SET UP FOR USE SELECTING THE LANGUAGE TV/VCR CLOCK SET UP (AUTO / MANUAL) 1 Plug in the TV/VCR/DVD power cord Plug the TV/VCR/DVD power cord into a standard AC outlet. NOTE: • If any digits appear in the corner of the screen, press the POWER button without unplugging the power cord. Make sure ... • Press the SELECT button to select TV/ VCR mode or make sure TV/ VCR lights on. • Press the POWER button to turn on the TV/VCR/DVD. 2 Select “LANGUAGE” Press the SETUP button on the - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP remote control. point to “LANGUAGE”. CAPTION [OFF] ZERO RETURN TIME SEARCH USER’S SET UP V-CHIP SET UP B LANGUAGE [ENGLISH] Press the Arrow button K or L to NOTE: This function effects only INDEX SEARCH the language on the screen menu and not the audio source. 3 Select “ENGLISH”, “ESPANOL” or “FRANCAIS” Select “ENGLISH”, “ESPANOL”= Spanish or “FRANCAIS”= French using the ENTER button. 4 Exit the Language mode Press the SETUP button on the remote control to return to TV mode. NOTE: If for some reason the menu is in Spanish or French, press the SETUP button on the remote control, press the Arrow button K or L to point to “IDIOMA [ESPANOL]” or “LANGAGE [FRANCAIS]”, then press the ENTER button, then press the SETUP button on the remote control. TV/VCR The TV/VCR/DVD clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/VCR/DVD, then set the auto clock setting to [ON] which will periodically correct the setting if necessary. NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only. MANUAL CLOCK SETTING Make sure ... • The TV/VCR/DVD is turned on. In the example below, the clock is to be set to: DATE May 6th, 2004 SETTING TIME 5:40PM 1 Select “SETTING CLOCK” - TV/VCR SETUP TIMER PROGRAMMING B SETTING CLOCK Press the SETUP button on the remote control. CHANNEL SET UP USER’S SET UP V-CHIP SET UP Press the Arrow button K or L to LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH point to “SETTING CLOCK”. Then press the ENTER button. 2 Select “MANUAL CLOCK SET” – SETTING CLOCK – Press the Arrow button K or L to point to “MANUAL CLOCK AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] SET”. B MANUAL CLOCK SET D.S.T. [OFF] Then press the ENTER button. 3 Select the month Press the Arrow button K or L until your desired month appears. (Example: May > 05) Then press the Arrow button B. (Or press the Arrow button s to go back one step.) 4 Select the day Press the Arrow button K or L until your desired day appears. (Example: 6th > 06) Then press the Arrow button B. – MANUAL CLOCK SET – MONTH DAY YEAR 0 5 / – – – – – – – – – HOUR MINUTE – –:– – – – – MANUAL CLOCK SET – MONTH DAY YEAR 0 5 / 0 6 – – – – – – – HOUR MINUTE – –:– – – – - 15-EN 1C29 AUTOMATIC CLOCK SETTING – MANUAL CLOCK SET – 5 Select the year Make sure ... MONTH DAY YEAR Press the Arrow button K or L • The TV/VCR/DVD is turned on. 0 5 / 0 6 THU 2 0 0 4 until your desired year appears. • Confirm the TV/VCR/DVD is receiving a RF HOUR MINUTE (Example: 2004) (Radio Frequency) signal from either an antenna or – –:– – – – cable system connection using the ANT. terminal on the rear of the TV/VCR/DVD. Then press the Arrow button B. 6 Select the hour – MANUAL CLOCK SET – Press the Arrow button K or L MONTH DAY YEAR 0 5 / 0 6 THU 2 0 0 4 until your desired hour appears. (Example: 5, PM) HOUR MINUTE 0 5:– – PM Then press the Arrow button B. 7 Select the minute – MANUAL CLOCK SET – MONTH DAY YEAR 0 5 / 0 6 THU 2 0 0 4 Press the Arrow button K or L until the desired minute appears. HOUR MINUTE (Example: 40) 0 5:4 0 PM 8 Start the clock 5:40 PM Press the SETUP button on the remote control. Although seconds are not displayed, they begin counting from 00 when you press the SETUP button on the remote control. Use this feature to synchronize the clock with the correct time. NOTE: When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock. TO CHANGE CLOCK SETTING If you want to change the clock, 1)Follow steps [1] to [2]. 2)Select where you want to change using the Arrow button B. 3)Enter correct numbers using the A...