Оценок - 1, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - KDL-37W5820 (11.98 mb)
Телевизоры - KDL-37W5820 (12.52 mb)
Фрагмент инструкции
• Check the cable connection. • Set the server to be displayed on the Home Menu (64). Sound The picture is good, but there is no sound. • Press +/– or (Mute). • Check if the “Speaker” is set to “TV Speaker” (88). • When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL AUDIO OUT (OPTICAL) may not output audio signals. 112/119 Troubleshooting Channels You cannot select your desired channel. • Switch between digital and analogue mode, and select the desired digital/analogue channel. Some channels are blank. • The channel is for scrambled/subscription service only. Subscribe to a pay TV service. • The channel is used only for data (no picture or sound). • Contact the broadcaster for transmission details. You cannot view digital channels. • Contact a local installer to find out if digital transmissions are provided in your area. • Upgrade to a higher gain aerial/antenna. 113/119 Troubleshooting Home Network Connection diagnostic results indicate a failure. Check Connections • Use a straight cable for the LAN cable. • Check if the cable is connected firmly. • Check the connection between the TV and the router. Check Settings • Change the IP address for the DNS server (“Checking the Network Connection” (62)) while referring to the following. - Contact your Internet service provider. - Specify the IP address of the router if you do not know the DNS of your Internet service provider. The server cannot be found, a list cannot be retrieved, and playback fails • Once server settings are changed, turn the TV off and on by pressing on the TV. • Execute “Server Diagnostics” (64). When using a PC as the server • Check if the PC is turned on. Do not turn off the PC while accessing. 114/119 Troubleshooting • If security software is installed on the PC, be sure to allow connections from external devices. For details, refer to the manual supplied with your security software. • The load on the PC may be too high or the server application may become unstable. Try the following: - Stop the server application and restart it. -Restart the PC. -Reduce the number of applications running on the PC. - Reduce the amount of content. Changes on the server are not being applied or displayed content differs from content on the server. • Sometimes changes are not applied to displays on the TV even though content has been added and/or deleted on the server. If this happens, go back up one level and try opening the folder or server again. Photo, music and/or video files do not appear or icons are not displayed. Preliminary Check • Check that the connected device supports DLNA. 115/119 Troubleshooting • Operations are not guaranteed for all servers. Also, operations differ depending on the features of the server and the content in question. • Turn the connected device on. Check Connections • Check that the LAN cable and/or mains lead/ AC power cord of the server has not become disconnected. Check Settings • Check that the connected...
Эта инструкция также подходит к моделям:Телевизоры - KDL-46V5800 (11.97 mb)
Телевизоры - KDL-46V5810 (11.97 mb)
Телевизоры - KDL-52V5800 (11.97 mb)
Телевизоры - KDL-52V5810 (11.97 mb)