Оценок - 3, средний балл: 4.7
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - KDL-52Z5500 (13.69 mb)
Телевизоры - KDL-52Z5500 (13.41 mb)
Телевизоры - KDL-52Z5500 (13.36 mb)
Фрагмент инструкции
screen. The picture contours are • Select “Standard” or “Off” in “Motionflow”. distorted. • Change the current setting of “Film Mode” to other settings. The picture is not displayed in • Select “Reset”. colour. The picture from equipment • Check the connection of the COMPONENT IN sockets/jacks and connected to the check if the sockets/jacks are firmly seated in their respective sockets/ COMPONENT IN jacks. sockets/jacks is not displayed in colour, or is displayed in irregular colours. 22 GB Condition Explanation/Solution Condition Explanation/Solution • Turn the connected equipment on. • Check the cable connection. • Press to display the list of inputs, then select the desired input. • Correctly insert the memory card or other storage device in the digital still camera. • Use a digital still camera memory card or other storage device that has been formatted according to the instruction manual supplied with the digital still camera. • Operations are not guaranteed for all USB devices. Also, operations differ depending on the features of the USB device and the video being played. You cannot select the • Check the cable connection. connected equipment on the • Set the server to be displayed on the Home Menu. Home Menu or you cannot switch the input. Sound The picture is good, but there • Press 2 +/– or % (Mute). is no sound. • Check if the “Speaker” is set to “TV Speaker”. • When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL AUDIO OUT (OPTICAL) may not output audio signals. Channels You cannot select your desired • Switch between digital and analogue mode, and select the desired channel. digital/analogue channel. Some channels are blank. • The channel is for scrambled/subscription service only. Subscribe to a pay TV service. • The channel is used only for data (no picture or sound). • Contact the broadcaster for transmission details. You cannot view digital • Contact a local installer to find out if digital transmissions are provided channels. in your area. • Upgrade to a higher gain aerial/antenna. Additional Information Home Network Connection diagnostic results indicate a failure. Check Connections • Use a straight cable for the LAN cable. • Check if the cable is connected firmly. • Check the connection between the TV and the router. Check Settings • Change the IP address for the DNS server (“Checking the Network Connection”) while referring to the following. –Contact your Internet service provider. –Specify the IP address of the router if you do not know the DNS of your Internet service provider. The server cannot be found, a list cannot be retrieved, and playback fails. • Once server settings are changed, turn the TV off and on by pressing 1 on the TV. • Execute “Server Diagnostics”. When using a PC as the server • Check if the PC is turned on. Do not turn off the PC while accessing. • If security software is installed on the PC, be sure to allow connections from external devices. For details, refer to the manual supplied with your security software. • The load on the PC may be too high or the server application may become unstable. Try the following: –Stop the server application and restart it. –Restart the PC. –Reduce the number of applications running on the PC. –Reduce the amount of content. 23GB (Continued) Condition Explanation/Solution Condition Explanation/Solution Photo, music and/or video files do not appear or icons are not displayed. Preliminary Check • Check that the connected device supports DLNA. • Operations are not guaranteed for all servers. Also, operations differ depending on the features of the server and the content in question. • Turn the connected device on. Check Connections • Check that the LAN cable and/or mains lead/AC power cord of the server has not become disconnected. Check Settings • Check that the connected device is registered under “Server Display Settings”. • Check that the server is correctly configured. • Check that the selected device is connected to the network and can be accessed. • If the “IP Address Settings” in “Network” under “Network Settings” is set to “DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take some time to recognise devices if there is no DHCP server. Execute “Server Diagnostics”. The TV cannot be found from Check Connections renderer-compatible device • Check that the LAN cable and/or mains lead/AC power cord of the (the controller). server has not become disconnected. Check Settings • Check if the “Renderer Function” is activated. • Check that the connected device is registered under “Renderer Access Control”. Only a few icons appear under • This is normal when internet connection is not available. the “Network” in the Home You can use three pre-installed Widgets properly. To enjoy more Menu. Widgets, please check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) You have been using registered Widgets, but now some contents won’t appear on the Widgets. • Check that the LAN ...
Эта инструкция также подходит к моделям:Телевизоры - KDL-40Z5500 (3.02 mb)
Телевизоры - KDL-40Z5710 (3.02 mb)
Телевизоры - KDL-46Z5500 (3.02 mb)