Оценок - 3, средний балл: 4.7
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - KDL-52V4210 (851.88 kb)
Телевизоры - KDL-52V4210 (17.52 mb)
Телевизоры - KDL-52V4210 (30.38 mb)
Фрагмент инструкции
Press the yellow button to select the Favourite list to edit. Press F/f to select the channel to add or remove, then press . Remove all channels from a Favourite list 1 2 3 4 Press the blue button. Press the yellow button to select the Favourite list to edit. Press the blue button. Press G/g to select “Yes”, then press . 20 GB Using Optional Equipment Using Optional Equipment Connecting Optional Equipment You can connect a wide range of optional equipment to your TV. For service use only Connect to Input symbol on screen Description 1 / AV1 AV1 When you connect a decoder, the TV tuner outputs scrambled signals to the decoder, and the decoder unscrambles the signals before outputting them. 2 / AV2 / AV2 SmartLink provides a direct link between the TV and a recorder (e.g. DVD recorder). 3 / COMPONENT IN Component The component video sockets support the following video inputs only: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Using Optional Equipment (Continued) 21 GB Connect to Input symbol on screen Description 4 HDMI IN 1 or 2 HDMI 1 or HDMI 2 9 HDMI IN 3 HDMI 3 (except for KDL40L4000) Digital video and audio signals are input from the connected equipment. In addition, when you connect the equipment that is compatible with control for HDMI, communication with the connected equipment is supported. Refer to page 30 to set up this communication. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN 2 socket through a DVI - HDMI adaptor interface (not supplied), and connect the equipment’s audio out sockets to the audio in sockets in the HDMI IN 2 sockets. ~ • The HDMI sockets support the following video inputs only: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p. For PC video inputs, see page 36. • Be sure to use only an authorized HDMI cable bearing the HDMI logo. We recommend that you use a Sony HDMI cable (high speed type). • When connecting an audio system that is compatible with control for HDMI, be sure to also connect it to the DIGITAL AUDIO (PCM) OUT (OPTICAL) socket. 5 / PC IN PC It is recommended to use a PC cable with ferrites like the “Connector, D-sub 15” (ref. 1-793-504-11, available in Sony Service Centre), or equivalent. 6 DIGITAL AUDIO (PCM) OUT (OPTICAL) (except for KDL40S40xx/ 40U40xx/ 40L4000) Use an optical audio cable. 7 You can listen to TV sound on the connected Hi-Fi audio equipment. 8 CAM (Conditional Access Module) Provides access to pay TV services. For details, refer to the instruction manual supplied with your CAM. To use the CAM, remove the “dummy” card from the CAM slot, then turn off the TV and insert your CAM card into the slot. When you are not using the CAM, we recommend that you keep the “dummy” card in the CAM slot. ~ • CAM is not supported in some countries/areas. Check with your authorised dealer. 0 AV3, and AV3 When connecting mono equipment, connect to the AV3 L AV3 socket. qa i Headphones You can listen to TV sound through headphones. 22 GB 3 Press the number buttons or PROG +/– to Viewing Pictures from Connected Equipment Turn on the connected equipment, and perform one of the following operations. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead Start playback on the connected equipment. The picture from the connected equipment appears on the screen. For an auto-tuned recorder In analogue mode, press PROG +/– or the number buttons, to select the video channel. For other connected equipment Press to display a list of connected equipment. Press F/f to select the desired input source, then press . The highlighted item is automatically selected if you do not perform any operation for two seconds after pressing F/f. If you have set an input source to “Skip” in the “AV Preset” menu (page 30), that input source does not appear in the list. z • To return to normal TV mode, press DIGITAL or ANALOG. To view two pictures simultaneously – PAP (Picture and Picture) You can view two pictures (external input and TV programme) on the screen simultaneously. Connect an optional equipment (page 21), and make sure that images from the equipment appear on the screen (page 23). ~ • This function is not available for a PC input source. • You cannot change the size of the pictures. • The analogue TV video in the TV programme picture will not appear while displaying AV1, AV2 or AV3 in the external input picture. However, you can hear the analogue video’s sound. 1 Press TOOLS. 2 Press F/f to select “PAP”, then press . The picture from the connected equipment is displayed on the left, and the TV programme is displayed on the right. select the TV channel. To return to single picture mode Press or RETURN. z • The picture framed in green is audible. You can switch the audible picture by pressing G/g. To view two pictures simultaneously – PIP (Picture in Picture) You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 21), and make sure that images from the PC appear on the screen. ~ • “...
Эта инструкция также подходит к моделям:Телевизоры - KDL-40L4000 (4.43 mb)
Телевизоры - KDL-40S4000 (4.43 mb)
Телевизоры - KDL-40S4010 (4.43 mb)
Телевизоры - KDL-40U4000 (4.43 mb)