Войти:
Оценок - 4, средний балл: 4 ( )

Инструкция по эксплуатации Sony, модель KDL-40L4000

Производитель: Sony
Размер: 4.43 mb
Название файла: 4109032131.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


101.6 cm) 40 inches (Approx. 101.6 cm) 46 inches (Approx. 116.8 cm) 52 inches (Approx. 132.2 cm) Display resolution 1,920 dots (horizontal) . 1,080 lines (vertical) Power consumption in “Home”/ “Standard” mode 175 W 175 W 215 W 222 W in “Shop”/ “Vivid” mode 197 W 197 W 238 W 249 W Standby power consumption* 0.19 W Additional Information (Continued) 35 GB Model name KDL-40S40xx/40U40xx/ 40L4000 KDL-40V4000/ 40V42xx KDL-46V4000/ 46V42xx KDL-52V4000/ 52V42xx Dimensions (Approx.) (w . h . d) with Table-Top Stand 99.7 . 69.1 . 27.9 cm (KDL-40S40xx/40U40xx) 99.5 . 68.8 . 27.6 cm (KDL-40L4000) 98.6 . 68.4 . 27.9 cm 112.0 . 78.2 . 30.7 cm 126.2 . 87.1 . 34.7 cm without Table- Top Stand 99.7 . 64.4 . 11.0 cm (KDL-40S40xx/40U40xx) 99.5 . 65.1 . 11.1 cm (KDL-40L4000) 98.6 . 64.6 . 11.0 cm 112.0 . 74.2 . 11.5 cm 126.2 . 82.9 . 11.9 cm Mass (Approx.) with Table-Top Stand 23.0 kg (KDL-40S40xx/40U40xx) 21.5 kg (KDL-40L4000) 21.5 kg 29.0 kg 38.0 kg without Table- Top Stand 20.0 kg (KDL-40S40xx/40U40xx) 18.5 kg (KDL-40L4000) 18.5 kg 25.0 kg 32.0 kg Supplied accessories See “1: Checking the accessories” on page 4. Optional accessories SU-WL500 Wall-Mount Bracket/SU-FL300M TV stand SU-WL500 Wall- Mount Bracket * Specified standby power is reached after the TV finishes necessary internal processes. When “Control for HDMI” is activated, standby power consumption is 0.6 W. When “Quick Start” is activated, standby power consumption will remain at 16 W for two hours after switching to standby mode. Design and specifications are subject to change without notice. PC input signal reference chart for PC Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Standard Signals Horizontal (Pixel) . Vertical (Line) VGA 640 . 480 31.5 60 VESA 640 . 480 37.5 75 VESA 720 . 400 31.5 70 VGA-T SVGA 800 . 600 37.9 60 VESA Guidelines 800 . 600 46.9 75 VESA XGA 1024 . 768 48.4 60 VESA Guidelines 1024 . 768 56.5 70 VESA 1024 . 768 60.0 75 VESA WXGA 1280 . 768 47.4 60 VESA 1280 . 768 47.8 60 VESA 1280 . 768 60.3 75 1360 . 768 47.7 60 VESA SXGA 1280 . 1024 64.0 60 VESA ~ • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you will see the message “NO SYNC”. PC input signal reference chart for HDMI IN 1, 2, 3* Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Standard Signals Horizontal (Pixel) . Vertical (Line) VGA 640 . 480 31.5 60 VESA SVGA 800 . 600 37.9 60 VESA Guidelines XGA 1024 . 768 48.4 60 VESA Guidelines WXGA 1280 . 768 47.4 60 VESA WXGA 1280 . 768 47.8 60 VESA SXGA 1280 . 1024 64.0 60 VESA * HDMI IN 3 is not available in KDL-40L4000. 36 GB Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When the 1 (standby) indicator is flashing The self-diagnosis function is activated. 1 Count how many times the 1 (standby) indicator flashes between each two second break. For example, the indicator may flash three times, go off for two seconds, then flash again three times. 2 Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When the 1 (standby) indicator is not flashing 1 Check the items in the tables below. 2 If the problem persists, have your TV serviced by qualified service personnel. Condition Explanation/Solution Picture There is no picture (screen is • Check the aerial/cable connection. dark) and no sound. • Connect the TV to the mains, and press 1 on the TV. • If the 1 (standby) indicator lights up in red, press "/1. No picture or menu • Press to display the list of connected equipment, then select the information from equipment desired input. connected to the scart • Check the connection between the optional equipment and the TV. connector appears on the screen. Ghosting occurs, or double • Check the aerial/cable connection. images appear. • Check the aerial location and direction. Only snow and noise appear • Check if the aerial is broken or bent. on the screen. • Check if the aerial has reached the end of its serviceable life (three to five years for normal use, one to two years when used at the seaside). The picture is distorted (dotted • Keep the TV away from electrical noise sources such as cars, lines or stripes appear). motorcycles, hair-dryers, or optical equipment. • When installing optional equipment, leave some space between the optional equipment and the TV. • Check the aerial/cable connection. • Keep the aerial/cable TV cable away from other connecting cables. There is picture or sound noise • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture when viewing a TV channel. reception (page 32). Tiny black points and/or • The screen is composed of pixels. Tiny black points and/or bright points bright points appear on the (pixels) on the screen do not indicate a malfunction. screen. The picture c...

Эта инструкция также подходит к моделям:
Телевизоры - KDL-40S4000 (4.43 mb)
Телевизоры - KDL-40S4010 (4.43 mb)
Телевизоры - KDL-40U4000 (4.43 mb)
Телевизоры - KDL-46V4000 (4.43 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории