Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Press^ or^ to brighten the picture. Colour Press ♦ or^ to decrease colour intensity. Press ♦ or^ to increase colour intensity. 10 Menu System Hue Press ♦ or^ to decrease the green tones. Press ♦ or ^ to increase the green tones. Hue can only be adjusted for NTSC colour signal (e.g. USA video tapes). Sharpness Press^ or^ to soften the picture. Press ♦ or ^ to sharpen the picture. Reset Select a to reset the picture to the factory preset levels. Intelligent On/Off Select to optimize the picture quality. Picture E.g. reduce noise level when signal is weak. If any changes are made to "Picture Adjustment", "Mode" will switch automatically to "Personal" and the new setting will be stored as "Personal". Sound P Sound p Sound UJ J> © a Auto Volume: Off > m a Auto Volume: Off Select®© ® Confirm® End® Select Confirm ŒI End S The "Sound" menu allows you to alter the sound adjustments. Auto On/Off Volume Volume level of the channels will stay the same, independent of the broadcast signal (e.g. in the case of advertisements). GB Menu System 111 ©Timer p Timer p Timer nv Sleep Timer: Off 1*1 Sleep Timer: Off J> On Timer: Off On Timer: Off 0 © is? É)J S w Ö Seleaffi® © Confirm® End® Select®®®® Confirm® End SCI The "Timer" menu allows you to alter the timer adjustments. Sleep Timer The "Sleep Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: After selecting the option, press then press ♦ or^ to set the time period delay (max. of 1 hour 30 minutes) and finally press a to store. While watching the TV, you can press the © button on the remote control to display the time remaining. • One minute before the TV switches itself into standby mode, "TV will turn off soon" is displayed on the TV screen automatically. On Timer The "On Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically on from standby mode. To do this: After selecting the option, press^, then press ♦ or^ to set the time period delay (max. of 12 hours) and finally press a to store. Finally press the standby button I/O on the remote control. After the selected length of time, the TV switches on automatically and "On Timer" will appear on the screen. The On Timer indicator^ on the TV set lights up in amber to indicate that "On Timer" is active. Any loss of power will cause these settings to be cleared. If no buttons are pressed for more than one hour after the TV is turned on using the "On Timer", the TV automatically goes into standby mode. 121 Menu System 0 Channel Set Up f> Channel Set Up f> Channel Set Up m Auto Tuning Ll Auto Tuning J> Programme Sorting J Programme Sorting (0 Programme Labels w Programme Labels 3 Manual Programme Preset w Manual Programme Preset a w Ö Select®® © Confirm® End® Select®®®® Confirm® End® The "Channel Set Up" menu allows you to preset channels on this TV. Auto Tuning The "Auto Tuning" option in the "Channel Set Up" menu allows you to automatically search and store all available TV channels. To do this: After selecting the option, press ^ and then proceed in the same way as in the step 4 of the section "Switching On the TV and Automatically Tuning" (see page 8). The "Programme Sorting" option in the "Channel Set Up" menu allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do this: After selecting the option, press ^ and then proceed in the same way as in step 5b) of the section "Switching On the TV and Automatically Tuning" (see page 9). Programme Labels The "Programme Labels" option in the "Channel Set Up" menu allows you to name a channel using up to five characters (letters or numbers). To do this: 1 After selecting the option, press ^. Press ♦ or^ to select the programme number with the channel you wish to name, then pressQD. 2 Press ^. With the first element of the label column highlighted, press ♦ or^ to select a letter or number (select "_" for a blank), then press ^ to confirm this character. Select the other four characters in the same way. Finally press to store. continued... Programme Sorting Menu System 113 Manual Programme Preset The "Manual Programme Preset" option in the "Channel Set Up" menu allows you to: a) Preset channels or a video input source one by one to the programme order of your choice. To do this: 1 After selecting the "Manual Programme Preset" option, press #. Highlight the Programme option and press #. Pressé or ♦ to select a programme number on which you want to preset the channel (for VCR, select programme number "0"), then press 4. (^1 The following option is only available depending on the country you have selected in the "Language/Country" menu. 2 After selecting the System option, press ^. Press # or# to select the appropriate broadcast TV system (B/G or D/K) until the correct sound is heard, then pre...
Эта инструкция также подходит к моделям:Телевизоры - KV-14CT1B (1.09 mb)