Оценок - 3, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - KDL-40W5500 (32.84 mb)
Телевизоры - KDL-40W5500 (32.37 mb)
Фрагмент инструкции
• Execute “Server Diagnostics” (63). When using a PC as the server • Check if the PC is turned on. Do not turn off the PC while accessing. 113/119 Troubleshooting • If security software is installed on the PC, be sure to allow connections from external devices. For details, refer to the manual supplied with your security software. • The load on the PC may be too high or the server application may become unstable. Try the following: - Stop the server application and restart it. -Restart the PC. -Reduce the number of applications running on the PC. - Reduce the amount of content. Changes on the server are not being applied or displayed content differs from content on the server. • Sometimes changes are not applied to displays on the TV even though content has been added and/or deleted on the server. If this happens, go back up one level and try opening the folder or server again. Photo, music and/or video files do not appear or icons are not displayed. Preliminary Check • Check that the connected device supports DLNA. 114/119 Troubleshooting • Operations are not guaranteed for all servers. Also, operations differ depending on the features of the server and the content in question. • Turn the connected device on. Check Connections • Check that the LAN cable and/or mains lead/ AC power cord of the server has not become disconnected. Check Settings • Check that the connected device is registered under “Server Display Settings” (63). • Check that the server is correctly configured. • Check that the selected device is connected to the network and can be accessed. • If the “IP Address Settings” in “Network” under “Network Settings” is set to “DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take some time to recognise devices if there is no DHCP server. Execute “Server Diagnostics” (63). The TV cannot be found from renderer- compatible device (the controller). Check Connections • Check that the LAN cable and/or mains lead of the server has not become disconnected. Check Settings • Check if the “Renderer Function” is activated (107). 115/119 Troubleshooting • Check that the connected device is registered under “Renderer Access Control” (107). Only a few icons appear under the “Network“ in the Home Menu. • This is normal when internet connection is not available. You can use three pre-installed Widgets properly. To enjoy more Widgets, please check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) You have been using registered Widgets, but now some contents won't appear on the Widgets. • Check that the LAN cable and/or mains lead/ AC power cord of the router/modem has not become disconnected. (*) • There's a possibility that the Widget Provider's server is out of service. Please try using the Widget later. (*) Your router/modem must be properly set to connect to the internet in advance. Please contact your Internet Service Provider for the router/modem settings. 116/119 Troubleshooting General Auto ...
Эта инструкция также подходит к моделям:Телевизоры - KDL-22E5300 (12 mb)
Телевизоры - KDL-22E5310 (12 mb)
Телевизоры - KDL-32E5500 (12 mb)
Телевизоры - KDL-32E5510 (12 mb)