Оценок - , средний балл: ( )

Инструкция по эксплуатации Sony, модель KV-XA25M50

Производитель: Sony
Размер: 861.99 kb
Название файла:

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

To watch the video input of the connected equipment, press t (see page 10). Connecting a camcorder/video game equipment using the t (video input) jacks PROGR MENU AUTO PROGR ENTER SELECTL(MONO) 3 L (MONO) R 3 To S video output Front of TV Camcorder Video game equipment To video and audio outputs : Signal flow To (S video input) To t 3 (video input) or Audio/Video cable (not supplied) S video cable (not supplied) Notes • You can also connect video equipment to the t 1 ,2 or 3 (video input) jacks at the rear of your TV. • If both (S video input) and t 3 (video input) at the front of your TV are input at the same time, the (S video input) is automatically selected. To view the video input to t 3 (video input), disconnect the S video cable. • Do not connect video equipment to the t 3 (video input) jacks at the front and the rear of your TV at the same time; otherwise the picture will not be displayed properly on the screen. Connecting audio/video equipment using the T (monitor output) jacks (yellow) -L (MONO) (white) -R (red) Rear of TV To antenna output To video and audio inputs or Audio system To audio inputs VCR : Signal flow To T (monitor output) Antenna cable (not supplied) Audio/Video cable (not supplied) 1 2 3 R L Y CB CR Note • If you select “DVD” on your TV screen, no signal will be output at the T (monitor output) jacks (see page 10). Using Your New TV Connecting a DVD player using the t (video input) jacks DVD player Rear of TV VIDEOR-AUDIO-L LINE OUT 1 2 3 L(MONO) R Audio/Video cable (not supplied) To t 1, 2, or 3 (video input) : Signal flow (yellow) -L (MONO) (white) -R (red) Connecting a DVD player using the (component video input) jacks 1 Connect R and L under (component video input) on your TV to the LINE OUT, AUDIO R and L output connectors on your DVD player. 2 Using a component video cable, connect Y, CB, and CR under (component video input) on your TV to the COMPONENT VIDEO OUT Y, CB, and CR output connectors on your DVD player. Rear of TV DVD player To L (white) R (red) Audio cable (not supplied) To component video output Component video cable (not supplied) To audio output : Signal flow To (component video input) VIDEOR-AUDIO-L LINE OUT Y COMPONENT VIDEO OUT S VIDEO OUT CBCR R L Y CB CR Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals. • Some DVD player terminals may be labeled differently: Connect To (on the DVD player) Y (green) Y Using Your New TV CB (blue) Cb, B-Y or PB CR (red) Cr, R-Y or PR • Since the high quality pictures on a DVD disc contain a lot of information, picture noise may appear. In this case, adjust the sharpness (“SHARP”) in the “ADJUST” menu of the “PICTURE MODE” menu (see page 22). Using Your New TV Securing the TV To prevent the TV from falling, secure the TV using one of the following methods: A With the supplied screws, attach the band to the TV stand and to the rear of the TV using the provided hole. or B Put the cord or chain through the clamps to secure the TV against a wall or pillar. 20 mm AB3.8 mm or Note • Use only the supplied screws. Use of other screws may damage the TV. Using Your New TV Watching the TV This section explains various functions and operations available while watching the TV. Most operations can be done using the remote. PROGR MENU AUTO PROGR ENTER SELECTL(MONO) 3 PROGR MENU AUTO PROGR ENTER 1 indicator 1 4 7 -/-- SOUND MODE PIC MODE A/B % ?/1 t a Number buttons JUMP MENU +/–/ENTER PROGR +/– 2 +/– Using Your New TV 1 1 Press ! to turn on the TV. When the TV is in the standby mode (the 1 indicator on the TV is lit red), press ?/1 on the remote or PROGR +/– on the TV. 2 Press PROGR +/– or number buttons to select the program number. For double digit numbers, press -, then the number (e.g., for 25, press -, then 2 and 5). or 1 2 3 4 5 6 7 8 0-/-- 9 To select a program number quickly (1) Press and hold PROGR +/–. (2) Release PROGR +/– when the desired program number appears. Note • When you select a program number quickly, the picture may be disrupted. This does not indicate a malfunction. continued Using Your New TV Watching the TV (continued) Additional tasks To Press Turn off temporarily ?/1. The 1 indicator on the TV lights up red. Turn off completely ! on the TV. Adjust the volume 2 +/–. Mute the sound %. Watch the video input t to select “VIDEO 1”, “VIDEO 2” , “VIDEO 3” (VCR, camcorder, etc.) or “DVD”. To return to the TV program, press a (or t on the TV). Jump back to the previous program JUMP. number Display the on-screen information* . * The picture, sound, and either the program number or video input are displayed. The on-screen display for the picture and sound information disappears after about three seconds. Changing the menu language You can change the menu language as well as the on-screen language. For details on how to use the menu, see Introducing t...