Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
Left side panel TV front 5 9 6 10 7 8 11 3 Control panel 4 1 2 1. Green LED 8.. EXIT — Press to instantly close an on-screen menu. Power LED (Green) = Power indicator 9.. CHANNEL p• — When no menu is on-screen, these .. Remote sensor — Point the remote control toward this buttons change the channel (programmed channels only; remote sensor (. “Remote control effective range” on . page 29). page 19). 10.. VOLUME t• — These buttons adjust the volume level. .. VIDEO- IN — The side panel A/V connections are 11.. INPUT — Repeatedly press to change the source you are referred to as “VIDEO ” and include standard A/V viewing (ANT/CABLE, VIDEO 1, VIDEO , ColorStream connections. HD1, ColorStream HD , HDMI 1, HDMI , PC). .. Service port — For service use only. Used for updating the television’s firmware. . POWER — Press to turn the TV on and off. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn off the TV, press and hold the POWER button on the TV control panel for 5 or more seconds to reset the TV. 6. ARROWS pqt• — When a menu is on-screen, these buttons function as up/down/left/right menu navigation buttons. 7. MENU (ENTER) — Press to access the menu system (. pages 26–27). When a menu is on-screen, the MENU button on the TV’s control panel functions as the ENTER button. Chapter 1: Introduction 11 TV back panel connections For an explanation of cable types and connections, see pages 12–18. 4 8 3 6 2 7 5 1 HDMI™ IN — High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. Also see item 3. HDMI connection is necessary to receive 1080i signals. ColorStream® HD-1 and ColorStream® HD-2 — Two sets of ColorStream® high-definition component video inputs (with standard stereo audio inputs) for connecting devices with component video output, such as a Toshiba DVD player with ColorStream®. Note: Component video cables carry only video information; separate audio cables are required for a complete connection. VIDEO-1 IN — Standard (composite) video and standard audio inputs plus optional S-video inputs for connecting devices with composite video or S-video output. Note: Standard (composite) video and S-video cables carry only video information; separate audio cables are required for a complete connection. Audio OUT Variable — Analog audio outputs for connecting an audio amplifier. 1.. .. .. .. ANT/CABLE — Antenna input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital Cable TV (QAM) signals. Digital Audio OUT — Optical audio output in Dolby Digital or PCM (pulse-code modulation) format for connecting an external Dolby Digital decoder, amplifier, A/V receiver, or home theater system with optical audio input...
Эта инструкция также подходит к моделям:Телевизоры - 26AV502R (6.24 mb)
Телевизоры - 26AV52R (6.24 mb)
Телевизоры - 26AV52RZ (6.24 mb)
Телевизоры - 32AV52R (6.24 mb)