Оценок - 5, средний балл: 4.2 ( )

Производитель: Toshiba Размер: 6.24 mb Название файла: Язык инструкции:

To memorize a channel to the button: 1.. Tune the TV to the channel you want to program into the button. .. Press and hold for about 2 seconds until the message “Memorized” appears on-screen. The channel has been programmed to the button. .. You can then change channels repeatedly, and when you press , the memorized channel will be tuned. The TV will return to the memorized channel one time only. Once you press and then change channels again, the CH RTN memory will be cleared and the button will function as Channel Return, by switching back and forth between the last two channels that are tuned.This feature also works for external inputs. Selecting the picture size You can view many program formats in a variety of picture sizes—Natural, TheaterWide 1, TheaterWide , TheaterWide , Full, : HD, Native, and Dot by Dot (available in PC Mode Only). Note: The “picture size” illustrations are examples only. The format of the image (in any of the picture sizes) will vary depending on the format of the signal you are currently watching. Select the picture size that displays the current program the way that looks best to you. You can save separate picture size preferences for each input on your TV. To select the picture size using the remote control: 1.. Press on the remote control. .. While the Picture Size screen is open, you can do one of the following to select the desired picture size: • Repeatedly press . • Press the corresponding Number button (0–6) while the Picture Size screen is open. • Press • or • while the Picture Size screen is open. To select the picture size using the menus: 1.. Select Picture Size in the Theater Settings menu. .. Press • or • to select the desired picture size setting. .. Highlight Done and press . Note: Some of the picture sizes may not be available depending on the receiving signal format (those will be “grayed out” in the Picture Size screen). Using these functions to change the picture size (i.e., changing the height/ width ratio) for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Note: If you select one of the TheaterWide® picture sizes, the top and bottom edges of the picture (including subtitles or captions) may be hidden. To view the hidden edges, either scroll the picture (TheaterWide 2 and 3 only) or try viewing the program in Full or Natural picture size. 7 Chapter 6: Using the TV’s features Picture Size Natural Some program formats will display with sidebars and/or bars at the top and bottom. TheaterWide 1 (for 4:3 format programs) The center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen. TheaterWide 2 (for letter box programs) A B C D E F G ---------------- The top and bottom edges of the picture may be hidden*. TheaterWide 3 (for letter box programs with subtitles) A B C D E F G ---------------- A B C D E F G -------------------------- The top and bottom edges are hidden*. Full (for 16:9 [480i, 480p] source programs only) • If receiving a squeezed 4:3 format program, the picture is stretched wider to fill the width of the screen, but not stretched taller. • None of the picture is hidden. Picture Size 4:3 HD (for 720p, 1080i, and 1080p program sources only) Picture is not distorted from original size. Native (for 480i (HDMI), 480p (HDMI), 720p, 1080i, and 1080p signal programs) • If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning). • This is especially useful for external HD sources such as DVHS movies, or PC graphics. Note: • This mode is supported only for HDMI (1080p,1080i, 720p, 480p, and 480i), ColorStream (1080i and 720p), and ANT/ CABLE (digital) inputs (1080p,1080i, and 720p). • Depending on the input signals, the border of the picture may be hidden, displayed in black, or noisy. Dot by Dot (for VGA, SVGA, XGA, WXGA, and SXGA sources only) The “Dot by Dot” picture is non-scaling display. Depending on the input signal formats, picture is displayed with sidebars and/or bars at the top and bottom. (Example: VGA input source) * To view the hidden areas (such as subtitles or captions), see “Scrolling the TheaterWide® picture” (.page 39). 8 Chapter 6: Using the TV’s features Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only) You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input. To set the scroll settings: 1.. Press and open the Video menu. .. Highlight Theater Settings and press . .. In the Picture Size field, select either TheaterWide or TheaterWide (you cannot scroll in any other mode). .. Press • to highlight the Picture Scroll field. .. Press • or • to scroll the picture up and down as needed. 6.. To save the new settings, highlight Done and press . To revert to ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: