Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
A (Gray) B (Gray) [to an External device] [to the TV] B A A [Cross Section of Ferrite Core] [Figure 3] 4 Use the ferrite core supplied to reduce the effects of electromagnetic interference induced into Component Video Y, Pb , Pr , L and R audio cables. Wind the Component Video Y, Pb , Pr , L and R audio cables on the ferrite core once. Place the ferrite core as close as possible to the TV connecting end of cables. (Black) [to an External device] [to the TV] 10 mm(+ / - 5 mm) [Cross Section of Ferrite Core] [Figure 4] - If there are six ferrite cores, attach as per Figure 1,2 and 3. - If there are seven ferrite cores, attach as per Figure 1,2,3 and 4. yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. *A 10 mm *B 18 mm Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. AG-S3** 3D Glasses AN-WF100 Wireless LAN AN-MR300 Magic Remote Control AN-VC*** Video Call Camera Compatibility PM47** PM67** PM68** PM97** AG-S3** 3D Glasses • • • • AN-WF100 Wireless LAN • • AN-MR300 Magic Remote Control • • • • AN-VC*** Video Call Camera • • • • P The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. Parts and buttons / DVI IN 2INPUTSETTINGSOK IN 1 (ARC) USB IN 1 / USB Apps USB HubHDD IN USB IN 2AV IN 2L/MONO34HDMI INRS-232C IN(CONTROL & SERVICE) AV IN 1LANANTENNA/ CABLE INLNB INSatellite 13/18 V 700 mA MaxAUDIO IN(RGB/DVI) RGB IN(PC) COMPONENTIN Screen Remote control and intelligent sensors1 Power indicator Speakers Buttons Except for PM47** Antenna cable socket 2 Connection panel Button Description / I Turns the power on or off. INPUT Changes the input source. SETTINGS Accesses the main menus, or saves your input and exits the menus. OK . Selects the highlighted menu option or confirms an input. H Adjusts the volume level. H Scrolls through the saved programmes. 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 Antenna cable socket - The Antenna cable socket may differ from the model. yyWhen transporting a large TV, there should be at least 2 people. yyWhen transporting the TV by hand, hold the TV as shown in the following illustration. yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration. yyWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION yyAvoid touching the screen at all times, as this may result in damage to the screen. yyIt is recommended to move the TV in the box or packing material that the TV originally came in. yyBefore moving or lifting the TV, disconnect the power cord and all cables. yyWhen holding the TV, the screen should face away from you to avoid damage. yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. Securing the TV to a wall (This feature is not available for all models.) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. --If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. CAUTION yyMake sure that children do not climb on or hang on the TV. NOTE yyUse a platform or cabinet that is strong and large enough to support the TV securely. yyBrackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer. Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the power cord to a wall outlet. CAUTION yyDo not place the TV near or on sources of heat, as this may result in fire or other damage. Adjusting the angle of the TV to suit view (This feature is not available for all models.) Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. CAUTION When adjusting the angle of the product, watch out for your fingers. »»Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. 10 cm 10 cm 10 cm 10 cm 20°20° CAUTION yyDisconnect the power first, and then move or install the TV. Otherwise electric shock may o...
Эта инструкция также подходит к моделям:Телевизоры - 50PM470S (25.92 mb)