Оценок - 3, средний балл: 3 ( )

Производитель: American Standard Размер: 5.13 mb Название файла: hruh0138.pdf Язык инструкции:

Turn to page 11 to continue the installation. English English Install the handle Push the handle over the valve stem. Tighten the handle screw using a 3 mm Allen wrench. The handle screw must engage the slot milled into the cartridge. Install the handshower Place a black rubber washer one end of the hose. Connect this end to the handshower outlet on the panel. Place the screen washer in the other end of the hose. Connect it to the handshower. Place the handshower in the handshower holder. Adjust the slider Use a .5 mm Allen wrench to adjust the tension on the slider. Turn the screw clockwise to make the slider easier to move. Turn the screw counter-clockwise to make the slider harder to move. 11 12 Justify the handle Turn the temperature control knob so that the indicator is next to the 100. marking. Install the handle. Tighten the screw. Turn the water on to the handshower. Turn the temperature control knob until the output water is 100.F. Turn the water off. Remove the handle. English 13 Set the high temperature limit stop (optional) Loosen the handle screw using a 3mm Allen wrench. Remove the handle. Remove the clip and the stop ring from the stem. Grasp the cartridge stop unit and turn it counter-clockwise to turn on the handshower. Turn the stem until the output water is the desired maximum high temperature (usually about 110°F*). Turn the stop unit clockwise to turn the water off. Install the stop ring so that the tooth is against the stop on the top of the cartridge. Replace the clip. Install the handle. Tighten the screw. *In Massachusetts, the maximum output temperature cannot exceed 112°F. English User instructions - Showerpanel I User instructions - Showerpanel II English Turn the temperature control knob clockwise to make the water cooler, counter- clockwise to make it warmer. The knob will stop at the 100°F position. If water hotter than 100°F is desired, push in on the knob, and continue turning it counter-clockwise. From the “off” position, turn the diverter handle counter-clockwise for the handshower. Turn the diverter handle clockwise for the bodysprays. Turn the handle further clockwise for the handshower and the bodysprays simultaneously. Turn the temperature control knob clockwise to make the water cooler, counter- clockwise to make it warmer. The knob will stop at the 100°F position. If water hotter than 100°F is desired, push From the “off” position, turn the diverter handle counter-clockwise for the tub spout. Turn the diverter handle clockwise for the handshower, then for the handshower and bodysprays simultaneously, and finally for temperature control knob diverter handle off position temperature control knob diverter handle off position in on the knob, and continue turning it counter-clockwise. Using the handshower The handshower has 3 spray modes -- Rain AIR, Whirl AIR, and Balance AIR. Push the function lever until the desired spray mode is achieved. the bodysprays. function lever 15 Scale removal The Raindance Air 3-j...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: