Оценок - 4, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
I want to exit Anynet+. • Select View TV in the Anynet+ menu. • Press the SOURCE button on the TV remote control and select a non- Anynet+ device. The message “Connecting to Anynet+ device...” appears on the screen. • You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. • Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. • You cannot use the play function when Plug & Play (initial setup) is in progress. . . English Problem Possible Solution The connected device is not displayed. • Check whether or not the device supports Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. • Search Anynet+ devices again. • You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. • If connection is terminated because there has been a power interruption or the HDMI cable has been disconnected, please repeat the device scan. The TV sound is not output through the receiver. • Connect the optical cable between TV and the receiver. . . English . Using the My Downloads Enjoy photos, music and / or movie files saved on a USB Mass Storage Class (MSC) 1. Press the CONTENT button. 2. Press the u / d / l / r button to select desired menu Videos, Photos, Music then press the ENTERE button. .. Videos Photos Music Source Watch TV .The displayed image may differ depending on the model. English . Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo, music and/or movie files to the USB jack on the side of the TV. 3. When USB is connected to the TV, popup USB . The displayed image may differ depending on the model. window appears. Then you can select New device connected. . . English NIt might not work properly with unlicensed multimedia files. NNeed-to-Know List before using My Downloads . MTP (Media Transfer Protocol) is not supported. . The file system supports FAT16, FAT32 and NTFS. . Certain types of USB Digital camera and audio devices may not be compatible with this TV. . My Downloads only supports USB Mass Storage Class (MSC) . devices. for PDP 550 and 570 Series MSC is a Mass Storage Class Bulk-Only . Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port. .USB (HDD) is not supported. for PDP 450 and 490 Series English . Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. . Do not disconnect the USB device while it is loading. . The higher the resolution of the image, the longer it takes to display on the screen. . The maximum supported JPEG resolution is 15360X8640 pixels. . For unsupported or corrupted files, the “Not Supported File Format” message . . is displayed. . If the files are sorted by Basic View, up to 1000 files can be displayed in each folder. . If the number of files and folders saved on a USB storage device is approximately over 4000, the files and folders may not appear and some folders may not be opened. English . MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements. . If more than 2 PTP devices are connected, you can only use one at a time. . If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) . . may not be supported. . If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction. English . If the TV has been no input during time set in Auto Protection Time, the Screensaver will run. . The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. . If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. . If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a f...
Эта инструкция также подходит к моделям:Телевизоры - PS43D450A2W (3.3 mb)
Телевизоры - PS43D451A3W (3.3 mb)
Телевизоры - PS43D452A5W (3.3 mb)
Телевизоры - PS43D455A2W (3.3 mb)