Оценок - 4, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The speakers are making an • Check cable connections. Make sure a video cable is not connected to inappropriate noise. an audio input. • For antenna or Cable connections, check the signal strength. Low signal level may cause sound distortion. . . English Issues Solutions and Explanations No Picture, No Video Issues Solutions and Explanations No Picture, No Video • Ensure the Sleep Timer is set to Off in the System menu. The TV turns off automatically. • If your PC is connected to the TV, check your PC power settings. • Make sure the AC power cord is plugged in securely to the wall outlet and the TV. • When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal. RF (Cable / Antenna) Connection • Make sure the coaxial cable is connected securely. The TV is not receiving all . . channels. • Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU -System -Plug & Play (Initial setup) and wait for all available channels to be stored. • Verify the Antenna is positioned correctly. • Compression of video contents may cause picture distortion, especially The picture is distorted: macro block error, small block, dots, with fast moving pictures such as sports and action movies. pixelization. • A low signal can cause picture distortion. This is not a TV problem. English A “Mode Not Supported” message appears. •Set your PC’s output resolution so it matches the resolutions supported by the TV. “PC” is always shown on the source list, even if a PC is not connected. •This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected. The video is OK but there is no audio. •If you are using an HDMI connection, check the audio output setting on your PC. Issues Solutions and Explanations PC Connection A “Mode Not Supported” message appears. •Set your PC’s output resolution so it matches the resolutions supported by the TV. “PC” is always shown on the source list, even if a PC is not connected. •This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected. The video is OK but there is no audio. •If you are using an HDMI connection, check the audio output setting on your PC. Issues Solutions and Explanations PC Connection . Network Connection for PDP 550 and 570 Series . • The Samsung Wireless USB dongle is required to use a wireless The wireless network connection failed. network. • Make sure the Network Connection is set to Wireless. • Make sure the TV is connected to a wireless IP sharer (router). English Issues Solutions and Explanations Issues Solutions and Explanations Others The picture won’t display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. • Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. • Adjust the picture size options on your external device or TV to full screen. Plasma TV is making humming noise. . • Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are used to create the images on the screen. . • If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower. • You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also try rerouting your connection cables. • Improper installation of wall mount can create excessive noise. English Issues Solutions and Explanations Image Retention (Burn In) Issue. • To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology. Pixel Shift technology enables you to set picture movement up / down (Vertical Line) and side to side (Horizontal Dot). A “Mode Not Supported” message appears. • Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to the resolution settings in the user manual. There is a plastic smell from the TV. • This smell is normal and will dissipate over time. The TV Signal Information is unavailable in the Self Diagnosis Test menu. • This function is only available with digital channels from an Antenna / RF / Coax connection. The TV is tilted to the side. • Remove the base stand from the TV and reassemble it. The channel menu is greyed out (unavailable). • The Channel menu is only available when the TV source is selected. . . English Issues Solutions and Explanations Your set...
Эта инструкция также подходит к моделям:Телевизоры - PS43D450A2W (3.3 mb)
Телевизоры - PS43D451A3W (3.3 mb)
Телевизоры - PS43D452A5W (3.3 mb)
Телевизоры - PS43D455A2W (3.3 mb)