Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Ferrite Core (Power Cord) The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug. Control Panel Front (or Side) Panel . The product colour and shape may vary depending on the model. 1 SOURCE Displays a menu of all of the available inputsources (TV, Ext.1, Ext.2, Component, PC, and HDMI). 2 MENU Press to see the on-screen menu of your TV’s features. 3 +.. Press to increase or decrease the volume. In the on-screen menu, use the +.. buttons as you use the < and > buttons onthe remote control. 4Press to change channels. In the on-screen C/P. C/P. menu, use the buttons as you use the ^ and Ў buttons on the remotecontrol. 5 (ENTER) Press to confirm a selection. 6 (Power) button Press to turn the TV on and off. Power Indicator Blinks and turns off when the power is on and lights up in stand-by mode. Remote Control Sensor Aim the remote control towards this spot onthe TV. 7 Speaker English - 5 English - 6 Connection Panel Continued... . . Whenever you connect an audio or video system to your set, ensure that all elements are switched off. . When connecting an external device, match the colour of the connection terminal to the cable. . The product colour and shape may vary depending on the model. 1 POWER IN Connect the supplied power cord. 2 Connecting external Audio Devices Connect RCA audio signals from the TV to an external source, such as Audio equipment. 3 EXT 1, EXT 2 Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. Input/Output Specification Connector Input Output Video Audio(L/R) RGB Video + Audio(L/R) EXT 1 . . . Only TV output is available. EXT 2 . . Output you can choose. 4 COMPONENT IN Audio (AUDIO L/R) and video (Y/PB/PR) inputs for Component. 5 SERVICE . Connector for service. . Connect the serial jack between the electro-motion wall mount bracket and your TV when you want to adjust the TV viewing angle using your remote control. 6 PC IN / AUDIO Connect to the video and audio output jack on your PC. Rear Panel 1 2 3 4 6 5 7 or Cable Television Network 8 or 7 HDMI IN(DVI IN) . Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analogaudio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio fromyour DVI device. (Not compatible with PC) . When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode asshown in the table below. Failure to observe this may result in picture distortion, imagebreakup or no picture. . Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen beingdisplayed) DVI IN AUDIO L/R DVI audio outputs for external devices. 8 ANT IN 75. Coaxial connector for Aerial/Cable Network. Supported modes for HDMI and Component 480i 480p 576i 576p 720p 1080i HDMI/DVI 50Hz X X X O O O HDMI/DVI 60Hz X O X X O O Component O O O O O O English - 7 English - 8 Viewing the Remote Control . . This is a special remote control for the visually impaired persons, and has Braille points on the POWER, Volume and Channel buttons. . The performance of the remote control may be affected by bright light. 1 POWER button (turns the TV on and off) 2 Number buttons for direct channel access 3 One/Two-digit channel selection 4 Channel control button (Refer to page 15) 5 Selects the TV mode directly 6 :Volume increase :Volume decrease 7 Displays the main on-screen menu 8 Temporary sound switch-off 9 Use to see information on the current broadcast 0 Returns to the previous menu ! Sound effect selection (Refer to page 22) @ Picture effect selection (Refer to page 17) # Adjusts screen brightness to save energy. $ Sound mode selection % Picture-In-Picture Off/On ^ TruSurround XT mode button & Available source selection * Previous channel ( Automatic Power-off ) Selects the HDMI mode directly. a :Next channel :Previous channel b Exit the on-screen menu c Change confirmation d Move to the required menu option / Adjust an option value respectively f Picture freeze g Picture size selection i Sub picture (PIP) channel selection j Sub picture (PIP) source selection k Sub picture (PIP) location selection Teletext Functions (Refer to page 34) 5 Exit from the teletext display (depending on the model) 7 Teletext index 9 Teletext reveal % Teletext hold & Teletext mode selection (LIST/FLOF) * Teletext sub page a P :Teletext next page P :Teletext previous page b Teletext cancel e Teletext display/mix both teletext information and the normal broadcast h Fastext topic selection j Teletext store k Teletext size Continued... Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward...
Эта инструкция также подходит к моделям:Телевизоры - PS-42C62H (4.96 mb)