Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Off: Sets the normal image display size on screen. On: Sets the image display size approximately 95 % of the normal image display. Off On Notes: • This setting is valid only when the input signals are as follows; 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI) • This setting is invalid when two screen display, digital zoom or Multi screen is selected. • When Display size is set to “On”, Pos. /Size adjustment cannot be used. • Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals. Options 1/3 Off-timer function INPUT lock Studio W/B Advanced PIP Display size Initial VOL level Maximum VOL level Initial INPUT Onscreen display Off Off Off Off Enable On Off 0 Off Off 0 Options Adjustments 43 Options 2/3 Off Off Off Off 0 Remote ID Serial ID ID select Button lock Remocon User level Item Effect Adjustments Button lock Off MENU&ENTER On Off: All the buttons at the bottom of the main unit can be used. MENU & ENTER: Locks MENU and ENTER/ buttons on bottom face of main unit. On: Locks all the button on bottom face of main unit. Remocon User level Off User1 User2 User3 Off: You can use all of the buttons on the remote control. User1: You can only use , , , , , , , buttons on the remote control. User2: You can only use , , buttons on the remote control. User3: Locks all the buttons on remote control. ID select Sets panel ID number when panel is used in “Remote ID” or “Serial ID”. Set value range: 0 - 100 (Standard value: 0) Remote ID Off On Off: Disables ID remote control functions. You can use normal remote control operations. On: Enable ID remote control functions. Serial ID Off On Sets the panel ID Control. Off: Disables external control by the ID. On: Enables the external control by the ID. Item Effect Adjustments Slot Power Off Auto On Off: Power is not transmitted to the slot power. Auto: Power is transmitted to the slot power only when main power is on. On: Power is transmitted to the slot power when main power is on or in the standby state. Note: In some cases, power is transmitted to the slot power when main power is on or in the standby state regardless of the slot power setting. V.Installation Off On Off: Sets fan to the horizontal installation mode. On: Sets fan to the vertical installation mode. Notes: • This functions when display is turned on. • This mode is available for TH-42PH9UK, TH-50PH9UK, TH-42PH9XK, TH-50PH9XK. • Vertical installation is available for TH-42PS9UK, TH-42PS9XK without this mode setting. • Turn up the power switch for the upward direction when you set Display vertically. Rotate Off On Off: Does not rotate the image. On: Rotates the image 180 degrees. Serial Slot Select Slot1 Slot2 Slot3 Selects the slot which communicates serial. Note: The setting of an external command can be set only from the fi xed serial terminal (see page 11) Options 3/3 Off Off Off V. lnstallation Rotate Serial Slot S...
Эта инструкция также подходит к моделям:Телевизоры - TH-37PH9UK (4.23 mb)
Телевизоры - TH-42PH9UK (4.23 mb)
Телевизоры - TH-42PH9XK (4.23 mb)
Телевизоры - TH-50PH9XK (4.23 mb)