Оценок - 1, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
(see page 43) • The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not the same as the ID select number (see page 43). ID remote control button operation The operation is the same as normal remote control except for the button. F (SEAM HIDES VIDEO) Setting Model No. Reference To hide joints between TVs. Suitable for moving image display. To show joints between TVs. Suitable for still image display. TH-42PS9UK TH-42PS9XK Step 4, Page 34 (2 . 2, 3 . 3, 4 . 4) (2 . 2F, 3 . 3F, 4 . 4F) TH-37/42/50PH9UK TH-42/50PH9XK Step 6, Page 36 ON OFF 38 SET UP for Input Signals 3D Y/C FILTER – For NTSC AV images COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the COMPONENT / RGB input terminals. Y, PB, PR signals “COMPONENT” R, G, B, HD, VD signals “RGB” Press to display the SET UP menu. Press to select the “COMPONENT / RGB-IN SELECT”. Press to select the desired mode. COMPONENT RGB Press to exit from adjust mode. Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.) Note: When ON, this setting only affects NTSC input signals. Note: Selection may not be possible, depending on which optional board is installed. 1 2 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF NORMAL [ VIDEO ] VIDEO NR OFF 3 1 2 Press ACTION ( ) button Press to select the “3D Y/C FILTER (NTSC)”. Press to set ON / OFF. Press to exit from adjust mode. 39 3:2 PULLDOWN / VIDEO NR COLOR SYSTEM / Panasonic AUTO Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.) SET UP for Input Signals Press to select the “COLOR SYSTEM” or “Panasonic AUTO”. Press to select each function. If the image becomes unstable: With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal. Press to select 3:2 PULLDOWN or VIDEO NR. Press to set ON/OFF. Press to exit from adjust mode. 3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to OFF. Notes: When ON, this setting only affects the following signal input: • NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal. • 525i(480i) 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal. VIDEO NR: Automatically reduces unwanted picture noise. Note: VIDEO NR cannot be adjusted while a ...
Эта инструкция также подходит к моделям:Телевизоры - TH-42PH9UK (4.23 mb)
Телевизоры - TH-42PH9XK (4.23 mb)
Телевизоры - TH-50PH9UK (4.23 mb)
Телевизоры - TH-50PH9XK (4.23 mb)