Оценок - 4, средний балл: 3.3
(
)
)
|
Фото и характеристики Clarion VMA5096 |
Фрагмент инструкции
For example, returning from a day at the beach, you may disconnect your game from the game port and connect your camcorder to view the video you just shot. CAUTION! Always take care when disconnecting and connecting electronic devices. Care and maintenance Cleaning the cabinet Use a soft, dry cloth to gently wipe dust and dirt from the cabinet. Do not use benzene, thinner, car cleaner, or other cleaners. These substances may damage the cabinet or cause the paint to peel. 10 VMA5096/VMA7196 VMA5096_VMA7196_OwnersManual_rev.pmd.p65 10 11/23/05, 2:53 PM Cleaning the LCD panel Use a soft, dry cloth to gently wipe off dust. The LCD panel surface can be easily scratched. Do not rub it with any abrasive object. Servicing the monitor In the event that trouble arises, never open the case or disassemble the unit. The internal parts are not serviceable by the user. Opening any components will void the warranty. CAUTION! Changes or modifications to this product not approved by the manufacturer will void the warranty and will violate FCC approval. 5. OPERATIONS OF ACCESSORIES Using a remote control The LCD monitor comes with an IR receiver that works with Clarion remote control devices. Aim the remote control at the IR receiver during use. Note The IR receiver only functions with select Clarion multimedia equipment. 6. INSTALLATION AND WIRING Read these instructions and the following precautions carefully. What is included in the box In addition to this manual, the box contains: • 5” VMA5096 monitor or 7” VMA7196 monitor • The flush mount bracket • Monitor release tool • 1 - 16 Pin main cable VMA5096/VMA7196 11 English VMA5096_VMA7196_OwnersManual_rev.pmd.p65 11 11/23/05, 2:53 PM English Before starting Disconnect the ground (-) terminal on the vehicle’s battery. WARNING! To prevent short circuits during installation, be sure to disconnect the battery. Precautions • This unit is exclusively for vehicles with a negative ground, 12V power supply. • Do not open the case. There are no user-serviceable parts inside. If you require assistance, consult your Clarion dealer or an authorized Clarion service center. • Use a soft, dry cloth to clean the screen. Never use a rough cloth, thinner, benzene, alcohol, or other solvent. The screen surface is easy to scratch—do not rub it when cleaning. • Always use great care when attaching anything to a vehicle! Visually inspect all sides of any potential screw location to ensure no damage will occur. WARNING! NEVER install this monitor where it is visible from the driver’s seat, or where it could injure any vehicle occupant in case of an accident. Ensure that your installation does not create risk of head-strike injury, and that the monitor will remain securely mounted in the case of an accident or sudden maneuver. Installing the monitor These TFT LCD monitors are designed for custom installation. While a basic flush- mount bezel is supplied, you may need parts that are not included (depending on your installation). Clarion also offers optional mounting kits: • The ZMT003 is a flexible gooseneck mount. • The PQE023 positions the monitor on the back of a vehicle headrest. Note The Clarion HRM100 and HRM150 headrest mounting kits are not compatible with this monitor. 12 VMA5096/VMA7196 VMA5096_VMA7196_OwnersManual_rev.pmd.p65 12 11/23/05, 2:53 PM Flush mounting in the headrest You may use the included trim bezel to flush-mount the monitor. 1. Ensure that you will have sufficient clearance for the monitor and its rear-located wiring harness. 2. Cut the opening. 3. Route the DIN-connector end of the wiring harness into the opening from the rear out the front. 4. Insert the trim bezel and route the wiring harness through the opening in the rear. 5. Firmly attach the bezel to the mounting surface and/or to the interior of the mounting surface. Wire harness opening Mounting tabs Mounting screw holes Bezel 6. Connect the wiring harness to the monitor, and tuck the excess wiring harness length carefully out of the way behind the bezel. Monitor and bezel VMA5096/VMA7196 13 English VMA5096_VMA7196_OwnersManual_rev.pmd.p65 13 11/23/05, 2:53 PM English 7. Gently insert the monitor into the bezel. Press only on the edges of the monitor, not on the screen. You should hear a few soft clicks as the monitor locks into place. CAUTION! NEVER press on the surface of the screen! Gently press on the edges of the monitor case. If you find that you cannot insert the monitor without excessive force, you may need to check your wire harness position for interference with the insertion process. You may also need to make the opening slightly larger. Removing the monitor from the bezel To remove the monitor from the bezel, insert the flat card (included in the box) between the monitor case and the side of the bezel to release the spring clips. Insert card here Bezel with monitor mounted Custom mounting using the threaded insert The monitor base has a threaded insert (1/4 - 20) that can be used with the optional Clari...
Эта инструкция также подходит к моделям:Телевизоры - VMA7196 (590.71 kb)