Оценок - 6, средний балл: 4.2 ( )

Производитель: Mitsubishi Electronics Размер: 5.29 mb Название файла: Язык инструкции:

You can schedule the recording to take place at a later time and program the recording duration for a minimum of 30 minutes and a maximum of 6 hours (in 30 minute increments). The default is 1 hour. When a digital recording is being made, the TV will direct the signals to the recording device using the IEEE 1394 cable. When an analog recording is being made, the TV will direct signals to the recording using the monitor audio/video outputs. During the recording, the TV can be powered Off. If the TV is powered On, it must be tuned to the source that is being recorded. Recording Now Can be used when viewing Antenna 1 or 2, an IEEE 1394 device, or a non-recording traditional device. To initiate recording now: 1. Press REC (record) on the TV remote. 2. Press DEVICE on the remote control to move to the Source Device section. 3. Press ADJUST or to select the source device you will record from. 4. Press ENTER to confirm selection and return to the “Record to” section. 5. In the “Record to” section, review the destination device (VCR) and duration. Change if necessary. 6. Press REC a second time to initiate recording. Time-Delayed Recording To initiate a time-delayed recording: 1. Press REC (record) on the TV remote. 2. Press DEVICE on the remote control to move to the Source Device section. 3. Press ADJUST , , or to select the source device you will record from. 4. Press ENTER to confirm your Record from selection and move to the Record to section. 5. Press ADJUST or to select the Record to device, duration time, start time (press ENTER after selecting hour, minutes and AM or PM to set the time) and day. For devices that can select channels, select the channel. 6. Select Add and press ENTER to add the recording to the record list. If your selection is successful, a confirmation message will be displayed. If you pick overlapping times, day(s), or destination devices, you will see a message stating there is a conflict. 7. To exit, press HOME on the TV remote after all recordings have been added. Figure 12. Record to screen NetCommand® Controlled Recordings, continued Copy-Protected Material When attempting to record copy-protected material, the Record functions of the NetCommand and IEEE 1394 systems may be prevented or stopped. If you have a recording that is tagged “Record Once”, NetCommand will change the tag to “Record No More”. Restrictions for Traditional VCRs If turned On, the TV must be tuned to the source device. • Your VCR should be connected directly to Audio Video 1. • The VCR must be set manually to “Line Input”. Display the Device Selection menu, highlight the VCR and press GUIDE to change VCR inputs. • The TV can select channels on compatible cable boxes for recordings. Leave the cable box turned on. • If the source device or recording device does not have separate power On and Off features, then leave that device powered On. Record List Screen Figure 13 To see a list of all currently programmed recordings, press GUIDE while viewing the Record To screen. A maximum of 32 recordings can be scheduled. To cancel a recording on the Record List, press ADJUST or to select the recording, then press CANCEL. To page through the list, press CH or . Figure 13. Record List screen Cancel Current Recordings To cancel a recording in progress, press DEVICE to display the Device Selection menu and highlight the source of the recording. Confirm that the icon for VCR (or recording device) is in the Connection Section next to the TV icon. Press the CANCEL button. The icon for the VCR (or recording device) will disappear from the Connection Section to confirm the cancellation. NetCommand® Controlled Peer-to-Peer Connections What is a Peer-to-Peer Connection? Figure 14 A peer-to-peer connection allows the IEEE 1394 devices in your TV network to talk to each other without the further need of TV intervention once the peer-to-peer connection is established. For example, the TV can setup a connection for an A/V Disc or DVCR that sends a recorded program to an IEEE 1394 monitor in another room. NetCommand will establish the connection between the two devices. Once the connection has been established, the TV can be turned off or used to watch another device. Recording from digital channels to a DVCR is also a peer-to-peer connection. In this case, the TV is one of the devices in the peer-to peer connection. Analog or traditional (non-digital) devices can not be used for peer-to-peer connections. Setting up a Peer-to-Peer Connection A peer-to-peer connection is a current connection and cannot be setup as a delayed connection. To establish a peer-to-peer connection: 1. Press CONNECT on the TV remote. 2. Press DEVICE on the remote control to move to the Source Device section. 3. Press ADJUST or to select the source device you will record from. 4. Press ENTER to confirm selection and return to the “Record to” section. 5. In the “Record to” section, review the destination device (example: DVCR) and duration. Change if necessary. 6. Pre...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: