Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
Enter two or three numbers for the major channel number. If three numbers are pressed, the separator is automatically added and you may proceed to step 2. If two numbers are pressed, you must add the separator by pressing the SUB button on the remote control. 2. Enter a 1-digit sub-channel number and wait four seconds. Enter a 1-digit sub-channel number and press ENTer. Or enter 2 digits for this sub-channel and the TV will automatically switch channels. Sleep Timer Setting the Sleep Timer: 1. Press SLEEP on the remote control. Note: A message indicating the length of time the sleep timer is to be set for is displayed on the TV screen. 2. Each press of SLEEP increases the time displayed by 30 minutes, until the maximum value of 120 minutes is reached. 3. After 5 seconds of inactivity, the message will disappear. 4. Press SLEEP to view the remaining time before the timer turns the TV off. Canceling the Sleep Timer: 1. Press SLEEP to display the on-screen message. 2. Press SLEEP repeatedly until OFF is displayed. Remote Control Functions: Operation of PIP and POP Picture-In-Picture (PIP) and Picture-Outside- Picture (POP) features allow you to view programming in different ways. While watching the main screen, you can display programs from other channels and other inputs. You can display a single PIP, side-by-side pictures, three POPs, or nine POPs. Activating the PIP and POP Figures 1-5 on following page Press PIP/POP to activate the PIP/POP option. With each press of the PIP/POP button on the TV remote control (within 3 seconds of each other), the PIP/POP will cycle through the following display options. • POP: side-by-side pictures • 3 POP • 9 POP • PIP • PIP/POP: off To turn PIP/POP off, wait at least 10 seconds, and press PIP/POP. 62 Remote Control Functions: Operation of PIP and POP MAIN PICTURESide-by-Side Figure 1 MAIN PICTURE P1 P2 P3 Figure 2 MAIN PICTURE P1 P2 P3 P4 P5 P6 P7 P8 P9 Figure 3 .............................................................................................................. Figure 4 Changing PIP/POP Device Press PIP DEVICE to change the PIP or POP picture source device. A menu similar to the Device Selection menu will be displayed. Changing PIP/Side-by-Side Channels Press PIP CH to scroll up and down through memorized channels on Ant-A and Ant-B. Exchanging Program Images Press EXCH to exchange the main picture and the PIP/POP picture. Moving PIP Image If no menus are on the screen, press ADJUST to move the PIP display anywhere on the main screen. Automatic POP Switching When automatic POP switching is active, the TV will cycle through memorized channels on Ant-A or Ant-B or strobe pictures from other A/V components in the POP display. Press PAUSE to pause or restart automatic POP switching. Selecting POP “Live” Image Press ADJUST to select a different POP “live” image (automatic POP switching must be paused.) Freeze the PIP and Side-By-Side Picture Press PAUSE to freeze the PIP and side-by-side images. Press PAUSE again to return to a “live” image. IMPORTANT • Side-by-Side cannot show the same channel or device on both sides. • ANT-B is not available as the PIP or Side-by-Side while ANT-A is the main image. • PIP/POP is compatible with 480i signals. PIP/POP is not compatible with 480p, 1080i signals or signals from ANT-DTV, IEEE 1394 devices or VGA input. 63 Remote Control Functions: This is a wide screen TV (also known as a 16:9 TV). This shape reflects the new types of images available from HDTV and many DVDs. There are still many older style narrow screen images (called 4:3 aspect ratio) you will encounter. While there will never be a perfect solution for displaying a narrow image on a wide screen, Mitsubishi offers several display formats to choose from. Press FORMAT on the TV remote control to cycle through the available display formats. Last used format for each device will be used when you return to that device. Note: Not all formats are available for PIP/POP. X9 POPX3 POP Definitions: Anamorphic - (also listed as “Enhanced for Widescreen TVs) These DVDs are recorded in a special way to properly show high-resolution images on 16:9 TV sets in the standard mode. Non-Anamorphic (also listed as 4:3, 1:33:1, Letterbox or Full Screen) These DVDs are recorded for use with traditional shaped TVs. They may be full screen (on 4:3 or 1:33:1) which crops movies to fit the narrow TV, or Letterboxed which adds black top and bottom bars. This information may or may not be listed on the DVD case. Some DVDs support both types of recordings. • Standard: This is the full screen format. HDTV signals will automatically use this format. This format is also useful to display Anamorphic DVDs that have 1.78:1 or 1.85:1 aspect ratios. Anamorphic DVDs that have the 2.35:1 aspect ratio will still display black bars at the top and bottom, but will show the entire image correctly. Narrow (4:3) images will be stretched evenly from side to side. Available for all signals. • Expand: This will enlar...
Эта инструкция также подходит к моделям:Телевизоры - WS-48511 (2.33 mb)
Телевизоры - WS-48511 (2.33 mb)
Телевизоры - WS-55711 (2.33 mb)
Телевизоры - WS-55511 (2.33 mb)