Оценок - 2, средний балл: 4 ( )

Производитель: Hitachi Размер: 8.25 mb Название файла: Язык инструкции:

. Adding SQV Channels 1. Select the channel using the “Channel” option box or press CH or . 2. Highlight the bank (SQV1-SQV9). 3. Press ENTER to check mark the selected SQV memory bank. 4. Repeat for additional channels or banks. Removing SQV Channels 1. Highlight the box for the SQV bank number. 2. Press ENTER to remove the check mark. SQV (SuperQuickView™) Using The Remote Control Viewing and changing SQV banks using the remote control: 1. Press the SQV button. 2. To change memory banks, press a number button within 5 seconds of pressing the SQV button. 3. Press the SQV button repeatedly to cycle through the channels available in that bank. Adding SQV channels using the remote control: 1. Press CH , , or number buttons to select the channel you want to add to the current SQV memory bank. 2. Press and hold the SQV button for about 2 seconds. When “SQV” and the memory bank number appear under the channel number, the channel has successfully been added. Removing SQV channels using the remote control: 1. Press the SQV button and then the memory bank number. 2. Press the SQV button repeatedly until you see the desired channel. 3. While the channel number and SQV indicator (with correct bank number) are still displayed on the screen, press the CANCEL button. If the CANCEL button is not pressed before the SQV indicator disappears automatically, the channel will not be removed. 4. When the SQV indicator disappears, the channel has successfully been removed only from that bank. “Other” banks remain unchanged. Signal Strength Displays the approximate signal strength of the currently tuned digital channel. Use this indicator to help you adjust the antenna direction for optimal signal strength. The higher the bar, the stronger the signal. Does not apply to analog channels. You can change the tuned channel while in this menu so that you can see the effects of antenna adjustments. To change the channel, either: • Highlight the channel box, press CH or ADJUST to display the desired channel number, and press ENTER. • Enter the channel number on the remote control and press ENTER. Captions Menu Background To make the analog closed captions easier to read, you can choose to display the background color as either black or gray behind the captions. Digital Captions The TV can display one of the following Captions for Digital sources: • Captions 1-6. Sent by broadcaster. • On if Mute. Closed captions when mute. When selected, the captioning signal (Caption 1) will turn on/off by pressing MUTE on the TV remote control. • Off. No closed captions. Note: For digital programs, if the broadcaster is sending only analog captions converted to digital, then the analog captions settings apply. Appearance Closed Captions provider selects the Default options when sending digital closed captions. You may select the Custom option to override and customize Closed Captions appearance. These settings do not apply to analog Closed Captioning converted to digital. Digital Settings Figure 19 Move the highlight to the Digital Settings icon and press ENTER. The Digital Settings menu allows you to customize the appearance of the closed captions sent by the broadcaster. Digital settings do not apply to analog closed captions converted to digital. Figure 19. Closed Captions Menu Digital Settings Captions Menu Figure 18 For analog channels, broadcasters can send either Standard or Text closed captioning. Standard Closed Captions follows the dialogue of the characters on screen and displays in a small section of the screen. Text Closed Captions often contain information such as weather or news and covers a large portion of the screen. On digital channels, broadcasters can send up to six different captioning selections or can send analog captions the same as the analog station sends. Each TV station may broadcast only one or two types of captions or none at all. The TV cannot decode Closed Captions received on COMPONENT 1–3 or HDMI 1 or 2. Figure 18. Captions Menu Analog Captions The TV can display one of the following captions for Analog sources: • CC1, CC2, CC3, or CC4. (Standard closed captioning signals). • Text1, Text2, Text3, or Text4. (Text closed captioning signals). • On if mute. Closed captions when mute. When selected, the standard closed captioning signal (CC1) will turn on/off by pressing MUTE on the TV remote control. • Off. No closed captions. IMPORTANT When analog text closed captioning is selected, a large black or gray box appears on your TV screen if no signal is broadcast. Captions Menu, continued Fonts You can customize the text of digital captions by selecting the font of your choice. The available font options are as follows: • Default—Selected by the Closed Captions provider • Font 1—Monospaced font with serifs • Font 2—Proportionally spaced font with serifs • Font 3—Monospaced font without serifs • Font 4—Proportionally spaced without serifs • Font 5—Casual font • Font 6—Cursive font • Font 7—Small Capitals font Size You can als...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: