Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
26 26-31 25&27NS100/180 1.4 26 6/1/00, 2:11 PM Set Up (Continued) L CHANNEL SETTING If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. 1 Press MENUto access MAIN MENU screen. 2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”. > (MAIN MENU screen) 3 4 Press VOL (+)or (–) to access SET UP mode. Press CH UP (8) or DOWN (9) to move the “ “CH SETTING”. ” mark to > (SET UP mode) 5 Press VOL (+)or (–)to access CH SETTING mode. (CH SETTING mode) 6 Press CH UP (8) or DOWN (9) to move the “ “AIR/CABLE”, then press VOL (+) orAIR/CABLE mode. ” mark to the (–) to access > (CH SETTING mode) 7 Press CH UP (8) or DOWN (9) to move the “ ” mark to the desired mode. (AIR/CABLE mode) 8 Press MENUto exit. NOTE: • Receivable channels of your TV set are: AIR channels: VHF: 2 through 13. CABLE channels: 1 (HRC and IRC mode only) UHF: 14 through 69. 2 through 125 (STD, HRC and IRC) 27 26-31 25&27NS100/180 1.4 27 6/1/00, 2:11 PM Set Up (Continued) L Saving broadcast TV channels into memory. 1.1 Press MENU to access MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”. 1.2 Press VOL (+) or (–) to access SET UP mode, then press CH UP (8) or DOWN (9) to move the “ ” mark to “CH SETTING”. 1.3 Press VOL (+) or (–) to access CH SETTING mode. 1.4 Press CH UP (8) or DOWN (9) to move the “ ” mark to “CH SEARCH”, then press VOL (+) or (–) to access CH SEARCH mode. > > > (CH SETTING mode) START (START) 2.1 Press VOL (+). The tuner will search through all available channels in your area and add them into the TV’s memory. STOP (STOP) 2.2 Press VOL (–). CH SEARCH will stop at the current channel and will not add any (CH SEARCH mode) higher channels. 2.3 Press MENUto exit. L Adding weak or additional channels or erasing unwanted channels from TV memory. 1.1 Press MENU to access MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the “ > ” mark to “SET UP”. 1.2 Press VOL (+) or (–) to access SET UP mode, then press CH UP (8) or > DOWN (9) to move the “ ” mark to “CH SETTING”. 1.3 Press VOL (+) or (–) to access CH SETTING mode, then press CH UP(8) or > DOWN (9) to move the “ ” mark to “CH MEMORY”. (CH SETTING mode) 28 26-31 25&27NS100/180 1.4 28 6/1/00, 2:11 PM Set Up (Continued) 2.1 Press VOL (+) or (–) to access CH MEMORY. 2.2 Use CH UP(8) or DOWN (9) or REMOTE KEYPAD to select each desired channel to add or erase. 2.3 Press VOL (+) to add a channel to the TV’s memory or press VOL (–) to erase a channel from the TV’s memory. 2.4 Press MENUto exit. or VOL (+) To add channel 12 to the TV memory VOL (–) To erase channel 12 from VOLUME (+)/(–) CHANNEL UP (8)/ DOWN (9) MENU (CH MEMORY the TV memory (CH MEMORY unmemorized channel) memorized channel) NOTE: • If you press VOL (+)again while in the CH SEARCH mode, auto-program will start again, and the previously memorized channels will be lost. L BLUE SCREEN Automatically turns the screen blue if a broadcast signal is not received. 1 Press MENUto access MAIN MENU screen. 2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”. > (MAIN MENU screen) 3 Press VOL (+)or (–) to access SET UP mode. (SET UP mode) 4 Press VOL (+)or (–)to access BLUE SCREEN select mode. 5 Press VOL (+) or (–)to select “ON”. 29 26-31 25&27NS100/180 1.4 29 6/1/00, 2:11 PM Set Up (Continued) 6 Press MENUto exit. NOTE: • Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN “OFF”. • While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the BLUE SCREEN is turned on. L PERSONAL PREFERENCE REMOTE By setting the PERSONAL PREFERENCE channels in advance, KEYPAD you can select your favorite channels easily. VOLUME (+)/(–) PERSONAL PREFERENCE CHANNEL UP (8)/ DOWN (9) MENU 1 Press MENUto access MAIN MENU screen. 2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”. > (MAIN MENU screen) 3 Press VOL (+) or (–) to access SETUP mode, then press CH UP(8) or DOWN (9) to move the “ ” mark to “PERSONAL PREFERENCE”. 4 Press VOL (+) or (–) to select PERSONAL PREFERENCE select mode in which you can program four favorite channels, in four different categories. (total of 16 channels) > (PERSONAL PREFERENCE select mode) 5 Press CH UP (8) or DOWN (9) to move the “ desired position. ” mark to the 6 Press REMOTE KEYPAD on the Remote to input the CHANNEL Number into the memory. Example: 125 — Press “100” followed by “2” and then “5”. 7 Repeat steps 4-6 to input the next CHANNEL Number. 30 26-31 25&27NS100/180 1.4 30 6/1/00, 2:11 PM Set Up (Continued) 8 Press MENUto exit. L To select the PERSONAL PREFERENCE channel. If the channels are memorized as shown to the right, press the Remote’s “A” button to select the Channels below. VOLUME (+)/(–) L UNIVERSAL PLUS FUNCTION VCR input mode will be selected automatically by pressing VCR PLAY butt...
Эта инструкция также подходит к моделям:Телевизоры - 25N S100 (3.56 mb)
Телевизоры - 27N S100 (3.56 mb)
Телевизоры - 25N S180 (3.56 mb)