Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
MENU Select the desired quick menu source.(G p.1 4) BACK Allows the user to move return one step in an interactive application, EPG or other user interaction function. EXIT Clears all on-screen displays and return to TV viewing from any menu. See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(G p.25) THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left/Right) the system settings to your preference. OK Accepts your selection or displays the current mode. SIMPLINK/ Controls SIMPLINK or USB menu.(Photo List and Music USB Menu List) control buttons FREEZE Pause the present picture at the screen. (It doesn't work at USB Mode.) The TV returns to normal viewing automatically if no signal is received or no operation is performed for 5 minutes. ■ Open .the battery compartment cover . on the back and install the batteries matching correct polarity (+with +,-with ■ Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones. ■ Close cover. ■ To remove the batteries, perform the installation actions in reverse. A-14 EXTERNAL EQUIPMENT SETUP ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■ For optimum picture quality, adjust antenna direction ■ An antenna cable and converter are not supplied. Wall Antenna Socket © Multi-family Dwellings/Apartments (Connect to wall antenna socket) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) ■ In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above. ■ If signal needs to be split for two TVs,use an antenna signal splitter for connection. 1 PREPARATION EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. ■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42/50PJ3***, 42PJ5*** models. ■ Here shown may differ from your TV. CONNECTING WITH A COMPONENT CABLE O Connect the video outputs (Y, Pb, Pr) of the external equipment (digital set-top box, DVD, etc.) to the COMPONENT IN VIDEO jacks on the TV. ^2 Connect the audio output of the external equipment (digital set-top box, DVD, etc.) to the COMPONENT IN AUDIO jacks on the TV. Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) a m /DVI IN 1 Select the Component input source using the INPUT button on the remote control. r-oS>- AV2 U u u (®) (0) # m PR Pb (V
Телевизоры - 42PJ350R (4.5 mb)
Телевизоры - 42PJ351R (4.5 mb)
Телевизоры - 42PJ550R (4.5 mb)
Телевизоры - 42PJ650R (4.5 mb)