Оценок - 5, средний балл: 4.6
(
)
)
|
Фрагмент инструкции
Select the desired location for the PSD-BW/L Nesting Cart. Locking Castor Non-Locking Castor Figure 1 1. Place the BW/L on a flat surface. NOTE: Make sure the locking castors (Qty 2) are attached to the rear legs of the Nesting Cart. 2. Insert each castor into the threaded mounting point located on the underside of the BW/L base (Figure 1). Turn each castor clockwise to tighten. Make sure all four castors are tightened all the way until flush with the base. Tighten using the 21mm caster wrench (supplied). Support Tube Installation (Figure 2) 1. Place the BW/L on a flat surface. 2. Take the support tubes and slide them over the mounting clamps that are located on the Nesting Cart. NOTE: To perform the following step, the access holes that are located at the end of the support tubes must line up with the set screw holes on the mounting clamps. The upper access holes will be used for cable management once the display has been mounted to the support tubes. 3. Insert the set screws into each hole and tighten using the supplied M5 Allen Wrench (Figure 2). M5 Allen Wrench Support Tubes Access Holes Mounting Clamps PSD-BW/L Base M10 x 35mm Set Screw Figure 2 Page - 5 - Installation Instructions PSD-BW/L Installation Instructions Page - 6 - PSD-SPA Installation (Figure 3) NOTE: Use of the PSD-SPA will depend on the mount that is used. All PSM/CTM Series mounts require using the PSD-SPA. The Revolution Series, USA and UFA Mounts, however, do not require the use of the PSD-SPA. 1. Slide the PSD-SPA over and down the support tubes. 2. Once the desired height has been determined, tighten the four (4) M8 x 10mm set screws, using the 5/32” Allen wrench (supplied) to secure the PSD-SPA (Figure 3). Figure 3 PSD-BW/L Nesting Cart Storage (Figure 4) The PSD-BW/L is designed to maximize storage space. When storing multiple carts, slide the Nesting Carts together as close as possible. NOTE: Please adhere to any WARNING statements that will apply to the different mounting configurations the PSD-BW/L Nesting Cart will be used with. Figure 4 5/32” Allen Wrench Support Tubes Support Tubes PSD-SPA PSD-BW/L Optional Mounting Configurations CTM-Series Revolution Series USA/UFA Series Page 7 Installation Instructions PSD-BW/L Technical Specifications All measurements are in inches (mm). PSD-BW PSD-BWL Notes Installation Instructions Page 8 Installation Instructions Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation Instructions Rotary Tilt Mount Model: RTM-L AUSTRALIA, NEW ZEALAND, NORTH AMERICA EUROPE OCEANIA (Distributor) 3130 East Miraloma Avenue Swallow House, P.O. Box 295 Anaheim, CA 92806 USA Shilton Industrial Estate, Mordialloc Victoria 3195 USA and Canada -Shilton, Coventry, England CV79JY Australia Phone: 800-368-9700 Phone: +44 (0) 2476 614700 Phone: 03 9586 6330 Fax: 800-832-4888 Fax: +44 (0) 2476 614710 Other Locations - Phone: (001)-714-632-7100; Fax: (001)-714-632-1044 ©Premier Mounts 2007 9531-009-011-00 RTM-L TABLE OF CONTENTS Warranty 2 Contact Premier Mounts 2 Warning Statements 3 Parts List 4 Installation Tools 4 Thread Depth Indicator Mount Installation 8 Universal Mounting Bracket Installation 9 Display Orientation 11 Securing the Display 11 Tilt Positioning 12 Optional Configurations 12 Technical Specifications 12 Addendum 13 PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs. What is Not Covered; Limitations PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS, PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE OF ITS PRODUCTS. PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PREMIER MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. What Customers Must Do for Limited Warranty Service If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within thirty (30) days. Proof of purchase (an original sales rece...
Эта инструкция также подходит к моделям:Телевизоры - MOUNTS PSD-BW (2.69 mb)