Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
WARNING 1 3 2 B Drill holes and insert anchors (B). Place plate (A) over anchors (B) and secure with screws (H). Tighten all fasteners. A H B concrete surface 6 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 M L N K N E G N Attaching Adapter Plate to Screen with VESA® 200 x 100 or 200 x 200 Mounting Pattern Attach hook bracket (M) to adapter plate (N) using four M5 x 6 mm screws (K) and #10 washers (L) as shown. 2 FOR VESA® 200 x 100 MOUNTING PATTERN: Choose hole pattern as shown below. Attach adapter plate (N) to back of screen using four M4 x 10 mm screws (E) as shown below. *NOTE: If screw (E) gets less than three threads of engagement, attach adapter plate (N) to back of screen using four M4 x 20 mm screws (F) and four spacers (C) as indicated below. Skip to step 3 on page 9. FOR VESA® 200 x 200 MOUNTING PATTERN: Choose hole pattern as shown below. Attach adapter plate (N) to back of screen using four M6 x 12 mm screws (G) as shown below. *NOTE: If screw (G) gets less than three threads of engagement, attach adapter plate (N) to back of screen using four M6 x 20 mm screws (I). If screw (I) still gets less than three threads of engagement, use four M6 x 30 mm screws (J). Skip to step 3 on page 9. NOTE: For VESA 75 mm and 100 mm patterns, see following page. 2-1 • If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not tightly secured, damage may occur to screen or product may fail. WARNING *For screens with a hole pattern in a pocket, spacers (C) go between adapter plate (N) and screen. C 7 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 Attaching Hook Bracket to Screen with VESA® 75 or 100 Mounting Pattern FOR VESA® 75 MOUNTING PATTERN: Choose hole pattern as shown below. Attach hook bracket (M) to back of screen using four M4 x 10 mm screws (E) as shown below. *NOTE: If hole pattern is in a pocket, attach hook bracket (M) to back of screen using four M4 x 20 mm screws (F) and four retaining spacers (C) as indicated below. E FOR VESA® 100 MOUNTING PATTERN: Choose hole pattern as shown below. Attach hook bracket (M) to back of screen using four M4 x 10 mm screws (E) as shown below. E 2 M M • If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail. WARNING C *For screens with a hole pattern in a pocket, spacers (C) go between hook bracket (M) and screen. 8 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 • If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail. WARNING GENERIC ADAPTER BRACKET FOR INSTALLING TO PEERLESS LC MODEL ADAPTER BRACKET For screen compatibility please refer to the LCD or plasma interface list on our website or call customer care for a screen specific adapter bracket LC or PLP models (not UL evaluated). FOR INSTALLING TO PEERLESS PLP MODEL ADAPTER BRACKET GENERIC ADAPTER BRACKET M5 X 6 MM OR M5 X 10 MM SCREW M5 X 10 MM SCREW NOTE: Refer to LC model adapter bracket instruction sheet for attachment of adapter bracket to screen. NOTE: Either M5 x 6 mm or M5 x 10 mm screws are included with the LC model adapter bracket. NOTE: Refer to PLP model adapter bracket instruction sheet for attachment of adapter bracket to screen. NOTE: M5 x 10 mm screws are included with the PLP model adapter bracket. 2 2 M M Attach hook bracket (M) to adapter bracket using four M5 x 6 mm or M5 x 10 mm screws. Attach hook bracket (M) to adapter bracket using four M5 x 10 mm screws. 9 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 Adjust tension knob on side of mount shown in fig. 4.1 to desired tension to balance your screen size and weight. Push or pull from top or bottom of screen to adjust tilt as shown. The tilt can be adjusted to a maximum of 15° forward or 5° backward. 4 • Be careful not to pinch fingers when opening and closing mount from the wall. CAUTION • Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten screws to 40 in. • lb (4.5 N.M.) maximum torque. CAUTION TENSION KNOB fig. 4.1 Roll screen to desired position (5° clockwise or counter-clockwise). Insert #10-32 x 6 mm flat head phillips screw (O) to lock screen into position as shown in figure 4.2. fig. 4.2 O To attach screen to wall mount (A), lower hook bracket (M) with screen at an angle into pockets of wall mount as shown in figure 3.1. Once clips are engaged, push down to seat clips in pockets as shown in figure 3.2. Insert and tighten M5 phillips screw (K) to lock screen to wall mount as shown in figure 3.3. To remove screen from mount, loosen screw (K) and lift screen off of mount. Installing and Removing Flat Panel Screen 3 SCREEN M K A fig. 3.1 fig. 3.2 fig. 3.3 • Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten screws to 20 in. • lb (2.26 N.M.) maximu...
Эта инструкция также подходит к моделям:Телевизоры - PARAMOUNT PP740 (928.38 kb)