Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Mains Connection 1. Connect the DC plug of the AC adaptor to the DC 12V(DC 15V-only 20”) input terminal of the set. 2. Connect the AC adaptor and AC cord. 3. Plug the other end of AC cord into a Power outlet with 100V - 240V ~, 50/60Hz. Power outlet AC Adapter AC Cord DC 12V input terminal (DC 15V-only 20”) 9 Preparation Aerial Connection CONNECTING THE TV DIRECTLY TO AN AERIAL Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminal on the back of the TV set. Aerial cable Aerial Terminal Aerial 10 Preparation AERIAL CONNECTION WITH VCR Connect your aerial cable to the RF(aerial) IN terminal on the VCR. Connect the RF OUT terminal of the VCR to the Aerial terminal on the TV set with RF cable. NOTE: If you wish to use only the Aerial (RF) connection, then you should store the VCR channel on programme number “ZERO”using the “Manual tuning”function (See page 16). Now you can watch the VCR in TV mode by selecting the programme number “PR00”. RF IN RF OUT VCR 11 Preparation Connecting external equipment 12 PC INPUT AV 1 Pr Pb Y R L PC AUDIO VIDEO2 AUDIO L R S-VIDEO COMPONENT Pr Pb R L Y Set Top Box VCR/DVD DVD RCA cable Headphone S-video cable SCART cable PC Audio cable PC PC D-sub cable Set Top Box VCR/DVD/Camcorder/ Video Game Preparation TV/AV/PC MODE SELECTION ) button on the remote controller. Press the TV/AV( ) button on the control panel repeatedly to select the source. You can also select the source using TV/AV( TV AV1 AV2 S-VIDEO COMPONENT PC TV There is the direct key on the remote controller, PC, for the PC mode. In TV mode, you can change the TV programme number with the PR button or the NUMBER button. NOTE : When the TV SET has no signal, OSD(On Screen Display) appears on the screen. AV INPUT JACK (VIDEO2) This jack has video / audio inputs. It is used to connect a VCR, Camcorder, DVD, STB, Video game. S-VIDEO INPUT JACK It has Y/C inputs. This jack is used to connect S-Video equipment. COMPONENT INPUT JACK (COMPONENT) This jack has Y/Pb(Cb)/Pr(Cr) inputs and audio inputs. It is used to connect a DVD. SCART JACK (AV1) This jack has video / audio inputs and outputs, RGB inputs. It is used to connect a STB, VCR, DVD. When the signal is RGB, the TV set switches automatically to AV1 mode. In most cases, the TV set switches automatically to AV1 mode, when the external equipment is connected in playback mode. If not, then use the AV button to select AV1. HEADPHONE JACK Insert the headphone plug(3.5 mm o) into this jack( ). The sound from the speaker will be automatically cut off. You can control the headphone sound with the VOL button. D-SUB JACK (PC RGB) This jack has RGB inputs and is used to connect a PC. See page 25 for more information of PC mode. PC AUDIO INPUT JACK Connect the stereo audio cable to the PC AUDIO jack and the other end to the Audio Out terminal of the Sound card on y...
Эта инструкция также подходит к моделям:Телевизоры - DSL-15D3 (1.76 mb)
Телевизоры - DSL-15D4 (1.76 mb)
Телевизоры - DSL-17D3 (1.76 mb)