Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
MENU 16 Installation Direct Search You can find the desired channel directly without Search function by inputting the channel number. 1. Place the selection bar to ‘Ch’. 2. Press the VOL button of the remote control to start. 3. Using VOL button of the remote control to select the digit, which you desire to change. 4. By pressing the PR button, you can find Picture Program Pr 1 Name Ch S09 System GB Search Memorize Sound Utilities Setup Move Adjust Prev. MENU the desired number or character. 5. For saving the channel you select, please memorize it. ENTER A STATION NAME You can change an existing name, or enter a name where none exists. 1. Move the selection bar to Name. 2. Press the VOL buttons to call up the Name menu. 3. Select the position with VOL button. 4. Use the PR buttons to select the desired character : A B C ... Z + - .(blank) 1 2 ... 9 Picture Sound Utilities Setup Move Adjust Prev. MENU Program Pr 1 Name Ch S09 System GB Search Memorize 17 Daily Use Switching On and Off SWITCHING ON 1. If the Indicator is not lit, then the TV set is powered off. You must press the button on the TV set. The set will switch to stand-by mode and then the Indicator will illuminate in Red. 2. Press the POWER button, PR button or NUMBER button on the remote controller or PR button on the TV set. The TV set will be switched on and then the Indicator will change to Green. SWITCHING OFF 1. Press the POWER button on the remote controller to return the set to its stand-by mode. The Indicator will illuminate in Red. 2. Press the button on the TV set to switch the TV set off completely. NOTE: If you don’t use the set for extended periods of time, unplug the AC cord from Power outlet. Recall The Recall button is used to display the current status; Mode (AV, Component, PC) and Signal information for 4 seconds. In TV mode, the Programme number and Station Name, Sound mode are displayed. 18 Daily Use Programme Selection The set has 100 programme numbers, PR00..PR99. DIRECT SELECTION The NUMBER buttons are used for direct programme selection. To select a two-digit programme, press the second numbered button within 2 seconds. PR SELECTION You can also select a programme by pressing step by step the PR buttons. Picture Control 1. Select the Picture menu. 2. Select and adjust the level of each function: “Brightness”, “Contrast”, “Colour”, “Sharpness”. The adjusted levels are stored automatically in Favourite mode. NOTE: Tint is displayed only when receiving a NTSC signal. Only Brightness, Sharpness and Contrast are displayed in PC mode. Move Adjust Prev. MENU Brightness 32 Contrast 32 Colour 32 Sharpness 32 Picture Sound Utilities Setup SMART NORMAL SELECTION When you press the NORMAL button repeatedly, you can call up three pictures settings; Normal1 Normal2 Favourite Normal1 ZOOM (ASPECT RATIO) CONTROL You can select the desired aspect ratio with the ASPECT button on the remote controller. (NB: It doesn't work in Component or PC mode.) The follow...
Эта инструкция также подходит к моделям:Телевизоры - DSL-15D3 (1.76 mb)
Телевизоры - DSL-15D4 (1.76 mb)
Телевизоры - DSL-17D4 (1.76 mb)