Оценок - 6, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
• Press STOP to stop playing the tape. • Press STOP/EJECT on the TV/VCR when the tape is stopped to eject the tape. Automatic Rewind The TV/VCR automatically rewinds the tape when it reaches the end of the tape during playback. Basic Recording 1. Insert a videotape, with its safety tab in place, into the TV/VCR. Note: You can’t record on a tape with the safety tab removed. If the safety tab is removed and you want to record on the tape, simply cover the hole with adhesive tape. 2. Make sure the remote control is in VCR mode by pressing the VCR button. 3. Press RECORD to begin recording. 4. Press STOP when you want to stop recording. If you want to pause the recording for a short time (such as during a commercial), press PAUSE instead of STOP. Note: Recording can’t be done in the COMPONENT INPUT (video/audio) mode. Chapter 1 Chapter 2 Remote Control Chapter Overview: • The buttons on the remote control • Programming the remote to operate other components • How to use the remote after you’ve programmed it • How to order a new remote control • Code list Changing Entertainment. Again. Graphics used within this publication are for representation only. The Remote Control 1234567890ON•OFF TVVCR DVD MUTE SKIP GO BACKSOUND TIMER INFO MENU CLEAR INPUT REVERSE PLAY FORWARD RECORD SLOW – INDEX + SPEED STOP PAUSE ANTENNA AUX SAT•CABLE OK CH + CH VOLVOL VCR2 TRACKING+ TRACKING- The Buttons on the Remote Control Your backlit remote has a light button that glows in the dark. Press this button to light the channel up and channel down (CH +/–) and volume up and down (VOL )buttons. If you don’t press any buttons for several seconds, the light turns off to conserve battery power. 0-9 (Number buttons) Enter channel numbers directly through the remote. To enter a 2-digit channel, press the two digits. To enter a 3-digit channel, press and hold the first digit until two dashes appear on the screen (to the right of the first number), then add the next two digits. Example: to tune to channel 123, press and hold 1 until 1– – appears, press 2, then press 3. ANTENNA button Used to switch between off-air and cable mode in VCR mode. Arrow buttons (up, down, right, and left) Press the arrow buttons to move through the on-screen menus. AUX button Puts the remote in AUX mode. CH (+ and –) buttons Scan up or down through stored channels. Press once to change the channel up or down; press and hold to continue changing channels. The remote must be in TV mode — press the TV button. CLEAR button Resets the time counter. The remote must be in VCR mode — press the VCR button. DVD button Puts the remote in DVD mode. Operates RCA, GE, and Proscan DVD Players. INFO button Displays TV/VCR’s current status. Displays time counter when a tape is inserted. Press again to remove display. INPUT button Repeatedly press to select the TV/VCR tuner, or line inputs (LINE 1 for the rear LINE IN/IN1 jacks, LINE 2 for the front VIDEO, L/MONO, R jacks or COMPONENT for the COMPONENT jacks). FORWARD (fast forward) button Fast forwards the tape when the TV/VCR is stopped. Also searches the picture in forward motion during playback. The remote must be in VCR mode — press the VCR button. GO BACK button Returns you to the previous channel. The remote must be in TV mode — press the TV button. INDEX (+ and –) buttons Searches for recorded index marks. The remote must be in VCR mode — press the VCR button. Chapter 2 The Remote Control MENU button Displays the TV/VCR’s main MENU. MUTE button Lowers the TV/VCR volume to its minimum level and automatically turns on closed- captioning. Press again to restore volume and turn off closed-captioning. ON•OFF button In TV or VCR mode, turns the TV/VCR on and off. If the remote is in another component mode (DVD, SAT•CABLE, etc.) and has been programmed (DVD, SAT•CABLE, etc.), press the ON•OFF button to turn that component on and off. PAUSE button Pauses the tape during playback. Press again to advance tape one frame. Also pauses the tape during recording to prevent recording of unwanted scenes. The remote must be in VCR mode — press the VCR button. PLAY button Plays a tape. Starts normal playback from pause or slow motion. The remote must be in VCR mode — press the VCR button. RECORD button Starts TV/VCR recording. The remote must be in VCR mode — press the VCR button. REVERSE button Rewinds the tape when the TV/VCR is stopped. Also searches the picture in reverse during playback. The remote must be in VCR mode — press the VCR button. SAT•CABLE button Puts remote in cable or satellite mode. SKIP button Press once before changing channels and the TV/VCR will wait 30 seconds before returning you to the original channel. Press repeatedly to add more time. The remote must be in TV mode — press the TV button. SLOW button Press to start slow-motion during playback. The remote must be in VCR mode — press the VCR button. SOUND button Press to select the audio output. SPEED (Tape Speed) button Selects a recording speed (SP or EP). The remot...