Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the adapter! 24. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 25. Excessive sound pressure from earphones and headphones can cause hearing loss.Adjustment of the equalizer to maximum increases the earphones and headphones output voltage and therefore the sound pressure level. PACKAGE CONTENTS . TV unit . Remote Control . Two (AAA) Batteries for the Remote Control . Power Cord . User Manual . Quick Start Guide BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 PREPARATION IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. PREPARING YOUR LCD HDTV FOR WALL MOUNTING We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wall, you need to remove the base. For your safety, please use listed wall mount bracket with minimum weight of the TV without stand. (Please see page.2 .) To attach a wall mount bracket to your TV: 1 Loosen the screws holding your TV to the stand and remove the stand base from the TV. 2 Secure the wall mount bracket to the back of your TV using four screws, as indicated in the illustration. For 26" model 200 mm 100 mm M4 screws 6 For 32" model 200 mm 200 mm For 42" model NOTE . Wall mount bracket & screws are not included. Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. Min 1 m 6 BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 7 2. Connect the antenna cable or CATV cable to the aerial socket TV ANTENNA at the back of the TV set. 3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 4. Power: Insert the power cord in the wall socket with AC power supply. You can see LED states at the front panel. If the LED colour is Blue, means the TV set is power on. If the LED colour is Red, which means this TV set is in standby state. 5. Turn the TV on: Press the POWER key on the Remote control or the side panel control knobs. The TV will be turned on in a minute with display on the screen. Power Key 8 BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 PERIPHERAL CONNECTION GUIDE AC POWER 26/32 42 42 . .... . . ... . . . . . . . . . . . . . . . . . . . 26/32 . COMMON INTERFACE (CI) – Conditional Access Module (CAM) use only. Please contact your service provider for details. ..... AV IN – Connect the primary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source. . USB – Technician service use only. . Earphone Output – Connect to the headphones. When the headphone is inserted to the plug, all the speakers will be muted. . TV ANTENNA – Connect to an antenna or digital cable (out-of-the-wall, not from Cable Box) for Digital TV.* ... SCART – Connect the video recorder or decoder to the television. Full SCART transmits RGB, CVBS video in/out, and audio in/ out; HALF SCART transmits S-Video, CVBS video in/out, and audio in/ out. Note : SCART1/2 has monitor out. (CVBS/YPbPr/ATV/DTV) . PC IN – Connect the video and audio cables from a computer here. . COMPONENT (Y/Pb/Pr with Audio L/R) – Connect the primary source for component video devices such as a DVD Player or set top box here. . SPDIF (Digital Audio Out) – When a digital audio signal is associated with the input selected for viewing, the digital audio will be available on this SPDIF connection to your home theatre system. ..... HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. Once your equipment is connected, use the following procedure to view the input signal: Press the SOURCE button on the remote controller to select the relevant source to view. (ex: Press YPbPr button to select “YPbPr” if you have connected a video recorder to Component socket.) OPERATING INSTRUCTIONS TO USE THE FRONT PANEL CONTROL 1235647 1 VOL + VOL +: Press to increase the sound volume level. 2. VOL VOL - : Press to decrease the sound volume level. 3. CH ^ CH ^: Press to select the next higher Programme number. 4. CH Ў CH Ў: Pr...
Эта инструкция также подходит к моделям:Телевизоры - A6 (2.46 mb)
Телевизоры - A632N (2.46 mb)
Телевизоры - A642N (2.46 mb)
Телевизоры - Aseries (2.46 mb)