Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
. The 2 and 3 buttons also have the same function as the /^/Ў buttons on the remote control. . If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television. COLOR TELEVISION AA68-03806M-00 Owner’s Instructions Before operating, please read this manual carefully, and retain it for future reference. Register your product at Record your Model and Serial number. . Model __________ . Serial No. __________ CL21Z43/21Z50/21Z57 Connection Panel (depending on the model) . The product color and shape may vary depending on the model. . Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks. 1 Audio/Video Output Jacks Connect to the audio/video input jacks of a recording VCR. 2 Audio/Video Input Jacks Connect to the audio/video output jacks of VCRs, DVD players and similar devices. 3 Component Video Input Jacks (Y, PB, PR) Connect to the Component video outputs of a DVD or DTV set-top box. 480i video signal input is available. When using the Component Video input, connect audio jacks to “AV IN 2 (AUDIO-L/R)”. 4 ANT IN Connect to an antenna or to a cable TV system. . Please be sure to match the color coded input terminals and cable jacks. When both the side and rear jacks (AV IN 2) are connected to external equipment, the side receives priority. 1 Audio Input Jacks Connect audio signals from a camcorder or video game. 2 Video Input Jack Connect a video signal from a camcorder or video game. 3 Headphone Jack Connect a set of external headphones to this jack for private listening. Front Panel 1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Indicator (Standby or Timer) 6 Power on/off Rear Jack 1 2 3 4 3 Side Jack 1 2 3 Remote Control (depending on the model) . Operation of remote control may be affected by bright artificial light near to the TV. . This is a special remote control for the visually impaired, and has Braille points on the POWER, Channel andVolume buttons. 1 POWER 9 R.SURF Turns the TV on and off. Press to automatically return to a preferred 2 Number buttons channel after a userpreset Press to select channels time delay. directly on the TV. 0 SOURCE3 – Press to display all of the Press to select channels available video sources. over 100. For example, for channel 122, press “-”, ! INFO then “2”, then “2”. Press to display information on the TV 4 VOL +, VOL screen. Press to increase or decrease the volume. @ PRE-CH Tunes to the previous 5 MENU channel. Displays the main on-screen menu. # CH , CH Press to change 6 ^/Ў/ channels. Controls the cursor in the menu. $ EXIT Press to exit the menu. 7 ENTER While using the on-screen % MUTE menus, press ENTER to Press to temporarily cut activate (or change) a off the sound. particular item. ^ SLEEP 8 MTS Press to select a preset (Multi-channel Television time interval for automatic Sound)shut off. Press to choose “Stereo”, “Mono”, or “SAP” (Secondary Audio Program). Installing Batteries Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “–” ends of the batteries are inserted correctly or the batteries are drained. . Do not mix battery types, i.e. alkaline and manganese. Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. Viewing the Menus 1 Press the MENU button. The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and “Setup”. 2 Press the ^ or Ў button to select one of the icons. Press the ENTER button to access the icon’s sub-menu. 3 Press the ^ or Ў button to move to items in the menu. Press the ENTER button to enter items in the menu. 4 Press the ^/Ў/ button to change the selected items. Press the MENU button to return to the previous menu. 5 Press the EXIT button to exit from the menu. English - 2 Setup -Plug & Play When the TV is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 Press the POWER button on the remote control. The message “Plug & Play” is displayed. It flickers for a little while and then Language menu is automatically displayed. Plug & Play 2 Press the < or > button to select the language, then press the MENU button. The message “Ant input check” is displayed. Adjust Skip Setup Time > Plug & Play > Caption > Language : English Ў More Make sure that the antenna is connected to the TV. Press the ENTER button, then the “Channel” is displayed. 4 Press the < or > button to select “Air”, “STD”, “HRC”, or “IRC”, then the MENU button. The message “Auto Program” is displayed. 5 Press the ENTER button to select “Start”. The TV will begin memorizing all of the available channels. Press the ENTER button to...
Эта инструкция также подходит к моделям:Телевизоры - 21Z57 (1.09 mb)