Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
16.AUDIO L/R (out) jacks-Connect to the •To use the COMPONENT VIDEO INPUT front panel are given priority over those on +100 button- Press to select cable channels audio input of an external amplifier or decorder. jacks on the rear of the TV, select “COMPO the rear panel. Suppose that the connections higher than 99. 17.S-VIDEO INPUT jack- Connect to the S-NENT”. are already made with the rear-panel jacks 9. MUTE button- Press the MUTE button to VIDEO output jack of a video camera or VCR Notes: and additionally with the front-panel jacks. turn off the sound portion of the TV pro- using the S-VIDEO cable (not supplied). •You may also set the Game mode and In this case too, the input via the front ones gram. (Volume level display turns LIGHT Note: The S-VIDEO jack is given priority VIDEO2 at the same time by pressing the is automatically selected. GAME button on the remote control. RED from LIGHT BLUE.) over the VIDEO jack on the rear panel. 2. AUDIO (INPUT) L/R jacks- Connect to "GAME" appears on the TV screen. In this Press the MUTE button again or press the 18.COMPONENT AUDIO INPUT jacks- the left/right channel audio output jacks of a VOL(ume) ^ or Ў button to restore sound. Connect to the left/right channel audio out-case, connect the external source to the video camera or VCR. AUDIO/VIDEO jacks on the front panel. 10.INPUT SELECT button- Press to select put jacks of DVD player when using the Note: The AUDIO (INPUT)L jack is for (See PICTURE ADJUSTMENT.) TV or the external input (VIDEO1, COMPONENT VIDEO INPUT jacks. mono input. The sound is heard from both •When you use the S-VIDEO connection, 19.COMPONENT VIDEO INPUT jacks VIDEO2) mode. speakers. Use this jack for monaural audio S-VIDEO jack on the rear panel is given pri- Connect to the Component Video output (See USING AUDIO/VIDEO INPUT JACKS.) equipment to be hooked up. ority over the VIDEO (Rear) jack. jacks of DVD player 11.CHANNEL RETURN button- Press this 3. MENU button- Press to display the menu 20.ANT(enna). IN jack- Connect to an anten button to go back to the previously viewed on the TV screen. na, cable system, or satellite system. POWER 1 2 3 4 5 6 7 8 9 0 +100 DISPLAY VOL CH CH VOL SLEEP CHANNEL RETURN MUTE MENU GAME INPUT SELECT PREPARATION FOR USE ADD/DELETE AUTO PRESET CH LANGUAGE SELECTION If you want to change the language of the on-screen menu, follow the procedure below. 1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 2) Press the POWER button to turn on the TV. 3) Press the MENU button so that the menu display appears on the TV screen. 4) Press the CH(annel) ^ or Ў button to point to "[ENG]". 5) Select "ENG(lish)", "ESP(anol)" or "FRA(ncais)" by using the VOL(ume) ^ or Ў button. 6) Press the MENU button to exit the menu. PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] CHANNEL PRESETTING ADD/DELETE AUTO PRESET CH PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] Note: You MUST PRESET channels BEFORE using CHANNEL ^ or Ў button. To preset a channel or to change a preset channel, follow the procedure below. 1) Press the POWER button to turn on the TV. 2) Press the MENU button so that the menu display appears on the TV screen. 3) Press the CH(annel) ^ or Ў button to point to "CHANNEL SET". Then, press the VOL(ume) ^ button. 4) Press the CH(annel) ^ or Ў button to point to "AUTO PRESET CH". Then, press the VOL(ume) ^ button. The tuner scans and memorizes all active channels in your area. . The TV distinguishes between standard TV channels and cable (CATV) channels. . When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen. . When you press the CH(annel) ^ or Ў button after selecting "AUTO PRESET CH", the tuner will stop at the memorized channels only. . The TV may recognize TV channels to be CATV channels by receiving conditions. In this case, try AUTO PRESET CH action again in the fine receiving conditions. . When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of channel scanning. [ADD/DELETE FUNCTION] PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ^ or Ў button to point to "CHANNEL SET". Then, press the VOL(ume) ^ button. OPERATIONS 3) Press the VOL(ume) ^ button so that "ADD/DELETE" is selected. 4) Use the CH(annel) ^ or Ў button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the normal screen automatically in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen. . Press the VOL(ume) ^ or Ў button to light up the channel number in LI...