Оценок - 4, средний балл: 3.8 ( )

Производитель: Electrolux Размер: 194.09 kb Название файла: 4713700en.pdf Язык инструкции:

l Fix the deflector with two screws O3,5x6,5. Fig. 2. Fig. . Electrical connection. Safety warnings for electricia. It must be ensured that the voltage and current indicated on the rating plat. agree with the voltage of the user to electricity supply. If the appliance has been equipped with a mains lead with a moulded-on type plug. the following regulations must be comply with. The plug moulded on to the lead incorporates a fuse. For replacement, use a . amp BS1362 fuse. Only ASTA approved or certified fuses should be used. If th. fuse cover/carrier is lost, a replacement cover/carrie must be obtained from a. electrical goods retailer. If the socket outlets are not suitable for the plug fitted t. the appliance, then the plug must be cut off and destroyed for safety reasons, an. an appropriate plug be fitted. When wiring the plug ensure that all strands of wire are securely retained in eac. terminal. Do not forget to tighten the mains lead clamp on the plug. Electrical connection. 230 V - using fixed power supply line with plug. 240 V - using fixed power supply line (Great Britain). Fuse ratin. 13 amp. (The unit should only be connected up by an authorized electrician). See rating plate for further information. It is recommended that the socket for the plug is sited above the cooker hoo. or above the overhead cabinet. This has 2 advantages. 1) The socket is not visible. 2) The appliance can easily be unplugged when necessary. If a fixed connection is required the cooker hood should be connected by a. electrical installer registered with a competent electricity company. An isolatin. device is to be provided on the fixed wiring side. Switches with a contact openin. of more than 3mm apply as isolating devices. These include-automatic cut-out switches, fuses and contactors (VDE 0730, s. 7, Part1). Electrical connection for the UKAppliances with 2 wiresThe appliance must be connected to fixed wiring with a doublepole switched fused spur outlet with or without pilot lamp. We strongly recommend the appliance to be connected only by aqualified electrician who is a member of the NICEIC who will com- ply with the IEE and any local regulations. NOTE: The terminology .DOUBLE POLE. means that both the live and theneutral supplies are switched and disconnected at the same time. The terminations labelled SUPPLY are for the connection for theinternal house wiring and the terminations labelled LOAD are forthe appliance. IMPORTANTThe wires of the mains lead supplied with this appliance arecoloured in accordance with the following code: Blue-NeutralBrown-LiveAs the colours of the flexible cord of this appliance may notcorrespond with the coloured markings identifying the ter- minals in the plug, proceed as follows: The wire which is col- oured brown must be connected to the terminal which ismarked with the letter L or coloured red. The wire which is coloured blue must be connected to theterminal which is marked with the letter N or coloured black. N LOAD L SUPPLY L ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: