Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Each of the keys operates as follow. Reset •. Recalls the parameter data that was previously adjusted. Mode free I Stored I Clears the parameter data previously set. Stores the parameters in the memory. Quit Closes PC ADJUST MENU. LC-XC1 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box IMAGE MENU will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the function that you want to select and then press SELECT button. Normal picture level preset on this projector. This picture level can be set by pressing the NORMAL button. Picture level adjusted for the picture with fine tone. Picture level adjusted manually in the custom setting dialogbox. When selecting “",” the custom setting dialog box willappear. Move the arrow to the item that you want tochange by pressing the POINT UP/DOWN button, andadjust each value by pressing the SELECT button to match with the image. Adjust the picture as necessary to eliminate flicker tromthe display. (From 0 to 127.) The number of the total dots in one horizontal period. Adjust the number to match your PC image. Move the arrow to the color that you want to adjust. Point to " to lighten the color and select ! to deepen the color. (From 0 to 63.) Point to " to decrease contrast, and select ! to increase contrast. (From 0 to 63.) Point to "to adjust the image darker, and select ! to adjust brighter. (From 0 to 63.) NOTE: The Fine sync and the Total dots Point to " to soften the image, and select • to sharpen the cannot be operated when the input signal image (From 0 to 15.)is from the COMPUTER INPUT-i Each of the keys operates as follow.(DIGITAL) terminal or “RGB” is selected on SYSTEM MENU (P24 and 25). Reset Recalls the data previously adjusted. The Fine sync and the Total dots cannotbe fully adjusted when “HDTV1O35i” or Stored Stores the adjusted data in the memory. “HDTV1O8Oi” is selected on SYSTEM MENU (P24 and 25). Quit Closes IMAGE MENU. LC-XC1 NORMAL FUNCTION The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Unit). The “Standard” display will be displayed on the screen for a fewseconds. The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button. Another dialog box AUTO IMAGE MENU will appear. 2 Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN button. Change the setting On or Off by pressing the SELECT button. Adjust the picture as necessary to eliminate flicker from the display. This item can be adjusted manually. (Refer to page 28.) The number of the total dots in one horizontal period. This item can be adjusted manually. (Refer to page 28.) Adjustment of the position of the image. This item can be adjusted manually. (Refer to page 30.) 3 Move the arrow to “Go!” and press the SELECT button to start the Auto Image function. This adjustment can be executed by pressing AUTO IMAGE button on the Top Control or on the Remote Control Unit. Stored .... Stores the On/Off setting of each item. Starts the Auto Image Adjustment. Closes AUTO IMAGE MENU. Go! Quit . ... NOTE: This menu cannot be operated when the input signal is from the COMPUTER INPUT-i (DIGITAL) terminal or“RGB,” “HDTV72Op,” “HDTV1O35i” or “HDTV1O8Oi” is selected on SYSTEM MENU (P24 and 25). The Fine sync., Total dots, and Picture Position of some computers may not be fully adjusted with the Auto Image Function. In that case, manual adjustment is required to make fine image. (Refer to page 28 to adjust “Fine sync.” or “Total dots” and page 30 to adjust Picture Position.) LC-XC1 The position of the image can be adjusted vertically and horizontally through PICTURE POSITIONADJUSTMENT. 1 Press the MENU button and the ON-SCREEN MENU appear. Press the POINT LEFT/RIGHT buttons to select POSITION and press the SELECT button. Another dialog I POSITION MENU will appear. 2 Select the arrow to the direction (described as #, $, %, or • that you want to adjust by pressing the POINT UP/DOV LEFT/RIGHT buttons, and then press the SELECT button. Each of the keys operates as follow. Reset Recalls the setting data previously set. Stores the setting data in the memory. Closes POSITION MENU. LC-XC1 This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN ~ and press the SELECT button. Another dialog box SCREEN MENU will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the function that you want to select and then press SELECT butto...
Эта инструкция также подходит к моделям:Телевизоры - LC-XC1 (1.55 mb)