Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
. To prolong this unit’s service life, please set your computer to power management mode. 27 DISPLAY MODE VIDEO FORMATS SUPPORTED COMPONENT Resolution Horizontal Scanning Frequency (KHz) Vertical Scanning Frequency (Hz) Format 720 480 31.47 59.94 480 i 720 480 15.734 59.94 480 p 1280 720 37.5 50 720 p 1280 720 45 60 720 p 1920 1080 33.75 60 1080 i 1920 1080 28.125 50 1080 i HDMI INPUT MODE Resolution Horizontal Scanning Frequency (KHz) Vertical Scanning Frequency (Hz) Format 720 480 31.47 59.94 480 i 720 480 15.734 59.94 480 p 1280 720 37.5 50 720 p 1280 720 45 60 720 p 1920 1080 33.75 60 1080 i 1920 1080 28.125 50 1080 i 1920 1080 27 24 1080 p 1920 1080 56.25 50 1080 p 1920 1080 67.5 60 1080 p NOTE: . The above listed formats are also related to the AV devices you are about to connect. Before you connect this unit with others please read all instructions carefully and make sure all necessary cables are connected. . This unit may be incompatible with some other formats which are not meet the above conditions. 28 SPECIFICATION 37 LCD TV Panel Type Flat Panel LCD 37 inches Diagonal Size Screen Format 16 9: Color System ATSC/QAM/NTSC Model Description Panel Resolution 1366 768 View Angle Response Time Contrast Brightness Maximum Color 400 nit 2500 : 1 178 H 178 V( ) / ( ) 6.5 ms 16.7 M Sound Output RF Input 75 ohm external terminal HDMI Input Video 480i 480p 720p 1080i.1080p :,,, Audio Two channel linear PCM 32 44 1 and 48kHz 16 20 and 24 bits :,.,, PC RGB Input- D sub 15pin- G 0 7Vp p 75ohms:.-, B 0 7Vp p 75ohms:.-, R 0 7Vp p 75ohms:.-, Power Requirement Power Consumption W250. Standby Consumption 3W. Dimension with stand()Approx. 1050(L) 330(W) 770(H) mm Weight Supplied Accessory Others Input/ Output Jacks Systems Power Sound System M Audio System BTSC L/R Speaker: 8W + 8W Composite Video Input Component Y Pb Pr Input/ Sound Input Audio jack 1 For CVBS Audio input : Audio :-jack 3 For PC RGB Audio input 500mV rms Impedance 20k ohms ,: SPDIF Output Digital sonud output 1.0 Vp-p, 75ohms RAC S-Video Input Y 1 0Vp p, 75ohms :.- C 0 3Vp p, 75ohms :.- RAC Y: 1.0 Vp-p, 75ohms, 0.3V negative sync Pb: 0.7Vp-p, 75ohms Pr : 0.7Vp-p, 75ohms AC120V, 60Hz 30 Kg Power Cord, Instruction Manual, Remote Control, Warranty Card, Batteries. Audio jack 2 For Component Audio input : 37 LCD TV Panel Type Flat Panel LCD 37 inches Diagonal Size Screen Format 16 9: Color System ATSC/QAM/NTSC Model Description Panel Resolution 1366 768 View Angle Response Time Contrast Brightness Maximum Color 400 nit 2500 : 1 178 H 178 V( ) / ( ) 6.5 ms 16.7 M Sound Output RF Input 75 ohm external terminal HDMI Input Video 480i 480p 720p 1080i.1080p :,,, Audio Two channel linear PCM 32 44 1 and 48kHz 16 20 and 24 bits :,.,, PC RGB Input- D sub 15pin- G 0 7Vp p 75ohms:.-, B 0 7Vp p 75ohms:.-, R 0 7Vp p 75ohms:.-, Power Requirement Power Consumption W250. Standby Consumption 3W. Dimension with stand()Approx. 1050(L) 330(W) 770(H) mm Weight Supplied Accessory Others Input/ Output Jacks Systems Power Sound System M Audio System BTSC L/R Speaker: 8W + 8W Composite Video Input Component Y Pb Pr Input/ Sound Input Audio jack 1 For CVBS Audio input : Audio :-jack 3 For PC RGB Audio input 500mV rms Impedance 20k ohms ,: SPDIF Output Digital sonud output 1.0 Vp-p, 75ohms RAC S-Video Input Y 1 0Vp p, 75ohms :.- C 0 3Vp p, 75ohms :.- RAC Y: 1.0 Vp-p, 75ohms, 0.3V negative sync Pb: 0.7Vp-p, 75ohms Pr : 0.7Vp-p, 75ohms AC120V, 60Hz 30 Kg Power Cord, Instruction Manual, Remote Control, Warranty Card, Batteries. Audio jack 2 For Component Audio input : TROUBLESHOOTING GUIDE SYMPTOM No power. The remote does not function. TV Bad Picture (snow, multiple images, distortion, blurry) No sound. Black and white picture. No picture or sound. Colored patches of picture. Panel function key does not respond correctly. The display monitor's panel goes hot. Unusual dots Stripes on screen The top of the monitor gets hot. Unable to select a certain channel. Disorder display at power on. CAUSE (AND REMEDY) • Make sure the AC power cord is connected. • Turn on the unit. • Remove any obstacles between the remote and the unit. • Use the remote near the unit. • Point the remote at the remote sensor on the unit. • Replace the batteries in the remote with new ones. • Check the direction of the antenna and adjust it if necessary. • Make sure the antenna cable is firmly connected. • Make sure all input cables are firmly connected. • Increase the volume. • Check whether the mute function has been activated on the Remote Control. • Check the PICTURE setting within the PICTURE menu. • Check to make sure the program you are watching is broadcast in Color and not Black & White. • Make sure the unit is plugged in and turned on. • Make sure that the TV mode is selected. • Try a new channel to check for possible station trouble. • Make sure the antenna is connected properly. • Increase the volume. • Make sure the antenna or audio/video source device is working properly. • Make sure all cables are f...