Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Press OK to confirm. 3. Press left/right button to make adjustment. And press OK to confirm. 4. To exit the Image setup menu, highlight Exit and press OK to confirm. NOTE: When in component mode, the Hue item is unavailable. 10 IMAGE EXIT IMAGE EXIT CONTRAST BRIGHTNESS SATURATION SHARPNESS HUE EXIT CONTRAST BRIGHTNESS SATURATION SHARPNESS HUE EXIT CONTRAST BRIGHTNESS SATURATION SHARPNESS HUE EXIT CONTRAST BRIGHTNESS SATURATION SHARPNESS HUE EXIT AUTO SEARCH ANTENNA TUNING SKIP EXIT Play Operation Play Operation Preparation: After all connections have been made, Press the POWER button to switch on the unit and then press MODE button to select DVD mode. Under DVD mode , the following disc can be read by the player : DVD /CD /MP3 /JPEG. NOTE: To set the unit into standby mode, press the POWER button . In standby mode the unit is supplied with main voltage but not active. In this condition you can switch on the unit using the POWER button. Disc Loading Steps: 1. Put the disc slightly into the disc tray. 2. The disc will be taken automatically into the tray. "read"will be highlighted on the screen and playback will begin. Warning: Do not play poor quality discs that may damage the player's lens. DVD Playback MENU Normally there is a selecting menu for DVD discs. Press direction button to move to the desired item and press OK to confirm During DVD playback, press menu button to get to the DVD start menu TITLE & CHAPTER Normally there are several titles in a DVD disc, and several chapters (sections) in a title. AUDIO Press the AUDIO button on the remote control to select a language for multi-language DVD disc. There can be up to 8 audio languages on a DVD disc. Press the SUBTITLE button to select different subtitles for multi-subtitle disc. ANGLE Press the ANGLE button repeatedly until the desired perspective is shown.The movies on some DVDs have been recorded from various camera positions. This lets you enjoy the same scene from different perspectives. In this case you'll usually find a marking on the DVD sleeve. VOLUME During playback, press the VOL+ button to increase the volume and press the VOL- button to decrease the volume. 19 Play Operation CD Playback The player will play all tracks on a CD disc by default. MP3 Playback 1. Load a MP3 disc into the disc tray. 2. Press the direction button to select the folder, use the OK button to enter it. 3. Press the direction button to select the track, press the OK or the PLAY/PAUSE button for playback. 4. Press the STOP button to stop playback. JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a "PICTURE CD" when they develop your film. Normal Playback 1. Load a JPEG disc in. 2. Press up/down direction button to select a submenu and press OK to confirm 3. Press the up/down direction button to select the contents. Many discs have other contents besides pictures. Picture Rotation This can be used only when the picture is normally displayed. Once another picture is selected, rotation will be cancelled automatically. There are four kinds of rotational modes: Inversion, Enantiomorphism, rotate left and rotate right. You can use direction buttons to select: "UP" ----- Inversion/Normal "DOWN" ----- Enantiomorphism/Normal "LEFT" ----- Rotate left "RIGHT" ----- Rotate right Zoom and Move of Picture The ZOOM button is used to turn on/off the zoom function and the move function. During zooming status, you can use the direction buttons to move the picture. During playback, press the STOP button to return to the previous menu. NOTE: Depending on how the disc was made, a JPEG disc may allow playback , but not rotation or zooming of the images. 20 AV Function FUNCTION Setup 1. Press direction button to highlight the Function menu. And press OK button to confirm . 2. Press direction button to highlight the desired option from Noise Reduce/input Source, and press OK to confirm the selection. Noise Reduction: press direction button to chose option from ON/ OFF, and press OK to confirm. If ON is selected, the image will be shown clearly, but with unclear background. If OFF is selected, both image and background are displayed normally. Input Source: a certain input mode has been marked to indicate current situation Press direction button to change the desired mode and press OK to confirm. 3. To exit function setup, highlight EXIT and press OK button. Picture Parameters setup (VIDEO MODE) 1. Under the VIDEO mode, press the LCD SETUP button once on remote control to access picture parameters setup menu, the screen will display as below: 2. Press up/down direction button, it appears SYSTEM setup menu , FUNCTION setup menu and EXTRA setup menu. 3. To exit the menu, press LCD SETUP button again, or press direction button to highlight the EXIT and then press OK to confirm ...