Оценок - 5, средний балл: 3.6
(
)
)
|
Фрагмент инструкции
* S-VHS is S-VIDEO. Back View AV1 IN (VIDEO AUDIO L/MONO, R) AV OUT (VIDEO AUDIO L/MONO, R) 4 Appearance Remote Controller The Remote Controller 5 OPERATION Turning the Power On/Off . The following describes how to turn the TV on/off using the TV's main switch and the remote controller. To turn the power on/off 1. Press the POWER switch, the red power indicator lights up. 2.If no picture appears on the screen, press the button or any one of 0~9 number buttons on the remote controller to turn the set on. Without using the remote controller, you can directly press VOL or CH or TV/AV button on the set to turn on the TV. *Note: If there are no input signals to the TV when the TV set is on, a blue background will appear on the screen (when B.B (blue back) is set ON.) After 15 minutes if there are still no signals to the TV, it will enter into standby mode automatically 3. Press the POWER switch to turn off the set completely. 4. If you want to turn off the TV temporarily, press the button on the remote controller to switch the set to standby mode. Special indication: Last-Mode-Memory: after turning off the power, the last TV mode, picture and sound setting mode and preset channels all are memorised. Therefore, next time you turn on the TV, the TV will work in the previous setting mode. . If you directly pressed the main power switch on the TV to turn it off, you must press the main power switch to turn on the TV. . If you pressed the main power switch to turn off the TV when in standby mode, press the main power switch and then operate from the remote controller to turn the TV on. Auto-Power-Off function: there are two kinds of Auto-Power-Off function: 1. If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically turn off after about 15 minutes. 2. Sleep-timer function. However, if the Sleep-timer is operating, it takes precedence, that is, the function of Auto-Power-Off, if no signals received will be ineffective. 6 OPERATION Tuning in . First, use the AUTO SEARCH function to preset all the active channels in your local area automatically. Then, arrange the preset channels with the MANUAL SEARCH, MFT (Manual Fine Tuning) and SKIP functions so that you can tune into only desired channels. To preset channels (Auto search) There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. To enter into menu Press the MENU button repeatedly to call up the POS. MEMORY menu on the screen Note: The MENU button refers to the MENU button on the remote controller or on the TV set, the or button refers to the or button on the remote controller or CH button on the TV set, the or button refers to the or button on the remote controller or the VOL button on the TV set. AUTO SEARCH POS.MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY 1. Press the or button to select and highlight AUTO MEMORY. POS.MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY 2. Press the button to start the AUTO SEARCH. All active channels will be preset and stored into the memory automatically. After presetting, the TV will return to the first channel program. AUTO MEMORY 5 VHFH STOP 3. During the process of AUTO SEARCH, pressing the button on the remote controller will stop the process and the TV will return to the first channel program. 0 7 OPERATION Tuning in (continued) . . .Use the MANUAL SEARCH function if desired channels can not be preset with the AUTOSEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions. To preset channels (Manual search) Manual search If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search. Enter into POS.MEMORY menu, press the1. or button to select and highlight POSITION. Press the or button to select a desired position number (from 00~99). Note: press the or button to select a channel number within 0.7 second. Press and hold the or button for over 0.7 second to select a decimal number. POS.MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!...... 2. Press the or button to select and highlight SEARCH. Press the button to search channels from current channel to higher channel. Press the button to search channels from current channel to lower channel. When a channel is located, the searching stops, this channel is then memorised with the preset channel number. Note: you can also make use of BAND selection to quicken the searching process in your desired band. Pressing the or button moves the band to the next step in the sequence below. VHFH UHFVHFL 3. When you want to store another channel with another position, repeat steps 1 & 2 above. POS.MEMORY POSITI...