This device enables the supply voltage to reach the blower (squirrel cage fan) motor. The blower motor contactor is controlled by the Phase 5 microprocessor controller (computer). (Refer to Section b-1 on page 86 for microprocessor [computer] information.) When 24 VAC is applied to coil A1-A2, the contactor closes and enables the circuit. The blower (squirrel cage fan) motor used for gas model dryers is 15 HP (horsepower) and for steam model dryers is 25 HP (horsepower). The motor wiring configu

If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SECURITE Do not store or use gasoline or Ne pas entreposer ni utiliser

Proper tension is maintained on the V-belts by tightening the gear reducer turnbuckle support. The oil in each gear reducer must be replaced every six (6) months by 1.4 liters of I.S.O. viscosity Grade 460 gear oil. 4. Servicing the Drive System a. Removing a Drive Wheel The drive wheels are removed through the front and back panels of the dryer, not through the sides. The front loading door and back loading door panels are hinged at the top. Remove the bolts holding these panels to tumbler sect

113398-12 American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA Telephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 e-mail: techsupport@amdry.com WARNING: For your safety the information in this manual must be followed to minimize the risk of fire or explosion and to prevent property damage, personal injury or death. — Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. — WHAT TO DO IF YOU SMELL GAS: Do not try t

12 Lint Drawer Assembly for Models Mfd. as of July 29, 2005 ....................................................................................... 13 Lint Drawer Assembly for Models Mfd. prior to July 29, 2005 .................................................................................... 14 Tumbler Assembly for Models Mfd. as of May 2004 .................................................................................................. 15 Tumbler Assembly for Models Mfd. prior to May 2004

nos. 5 through 12) 7 150617 2 3/8-16 x 1” Hex Head Machine Bolt 8 153005 2 3/8” Lock Washer 9 153004 2 3/8” Flat Washer 10 801009 1 Idler Square Washer 11 152004 1 5/16-18 Hex Nut 12 150509 1 5/16-18 x 3” Hex Head Machine Bolts 36 American Dryer Corporation 450343-4 450343-4 37 Gas Burner Assembly For Models Mfd. as of May 20, 2000 Illus. No. Part No. Qty. Description 1 141104 2 Small Tube Burner 2 151001 2 #8-32 Pal Nut 3 150108 2 #8-32 x 1/2” Phillips Pan Head Machine Screw 4 140820* 2 #29 Bur