Оценок - 2, средний балл: 4.5 ( )

Производитель: Frigidaire Размер: 595.3 kb Название файла: 981340EN.pdf Язык инструкции:

It is calculated automatically on the basis of the maximum load accepted for each type of fabric and of the required degree of drying. When the programme starts, the remaining time is displayed every 5 minutes. Delayed start If you have selected a delay time by means of the relevant button, the display shows it for 2 seconds;then it shows the duration of the previously selected programme. The countdown is displayed every 30 minutes until it displays “90 minutes” and then hour by hour. End of programme A flashing zero indicates the end of the programme and it is displayed after the “anticreasing” phase. Structure of the appliance Incorrect option selection If you select an option that is not compatible with the programme you have selected, the display shows E EEr rrr rr(error) This code will reappear during the execution of the programme if you press one of the option buttons or turn the programme selector. Alarm code In the case of a functional problem, the display shows an alarm code (e.g. E EE2 221 11). Structure of the appliance; Brief operating instructions 9 INDICATOR LIGHTS These lights indicate the following functions: • “DROGEN/SECHAGE” light. This light indicates that the appliance is in the drying phase. • “AFKOELEN/REFROID.” light. This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry. • “EINDE/FIN” light. This light is on at the end of the cooling phase, during the anti- creasing phase and at the end of the programme. • “FILTER/FILTRE” light. This light illuminates at the end of the programme to remind you that the filters must be cleaned. Brief operating instructions • Spin the laundry as much as possible. • Sort out the laundry. • Put the laundry into the tumble dryer. • Switch the machine on by selecting the drying programme/time. • If necessary, press the “ZOEMER/ALARME” and/or “KORT/COURT” and/or “LAGE TEMP/DELICAT” (This option cannot be selected with “KORT/COURT” function) and/or “STARTUITSTEL/D.DIFF.” button. • Press the “START/PAUSE-MARCHE/PAUSE” for about 2 seconds to start the dryer. When the programme is in progress, the door can be opened in order to remove laundry or to add other items. At the end of the programme: • Switch off the tumble dryer. • Remove the laundry. • Clean the fluff filters. Drying Drying Before the first drying cycle Before using your tumble dryer for the first time, we recommend to place a few damp cloths inside the appliance and dry for 30 minutes. There may be dust inside a brand new tumble dryer. Sort out the laundry • To prevent bundling of laundry: close zips, button up pillow cases and duvet covers; tie any strings, such as apron strings. • Empty pockets. • Remove any metal parts (paper clips, safety pins, etc. ....). • Turn garments made of double layer fabrics inside out (e. g. turn anoraks with cotton lining inside out), so that they will dry better. • Shake out the laundry. Open the door • Open the door by presing on the left side as per picture Load the laundry Warning! When closing the door, do not trap any garments! The fabrics could get damaged. Please check the laundry does not get caught between the door and filter. • Put the prepared and shaken out laundry into the dryer. Drying Switch the machine on - select the drying programme/time • Select the drying programme or time. The lights “DROGEN/SECHAGE”, “AFKOELEN/REFROID.” and “EINDE/FIN” come on. The light of the “START/PAUSE-MARCHE/PAUSE” button flashes and the display shows the duration of the programme. If required, press the “LAGE TEMP/DELICAT” button and/or the “ZOEMER/ ALARME” button or the “KORT/COURT” button. Select the “STARTUITSTEL/D.DIFF.” if required. The selected delay appears on the display for 2 seconds, then the duration of the selected programme is displayed. Start the machine Press the “START/PAUSE-MARCHE/PAUSE” button: the corresponding light stops flashing and drying starts. Only the “DROGEN/SECHAGE” light stays lit. If you have selected the “STARTUITSTEL/D.DIFF.”, the machine begins its countdown. The drum turns alternately in both directions during drying. All drying programmes end with a 10 minute cooling phase (light “AFKOELEN/REFROID.” is on). The “EINDE/FIN”and “FILTER/FILTRE” lights illuminate. The display shows a static zero and the buzzer sounds to indicate the end of the cycle. You may remove the laundry after this phase. Remove or add laundry It is possible to interrupt the drying cycle at any time in order to remove or add laundry. Open the door. Caution! Laundry and drum can be hot. Remove or add laundry. Close the door and press “START/PAUSE-MARCHE/PAUSE” button to continue the drying cycle. Drying End of drying cycle If the laundry is not removed at the end of the cycle, the dryer performs an anti-creasing phase (duration: 30 minutes maximum). If you do not remove the laundry, the dryer will stop automatically at the end of the anti-creasing phase. The “EINDE/FIN” and ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: